Take that rusted metal from dull to fresh in just a few easy steps! This Rust Preventive Coating - Quart can be painted directly over rust or, for a better and longer-lasting bond, used in combination with POR-15 Cleaner Degreaser & Metal Prep. Creates a "hammer tough" non-porous coating that's flexible, nearly indestructible, and will never rust again. Offers top-notch chemical resistance against salt, oils, grease, fuel, and more. Ideal for Automotive, Home, Marine, Industrial applications. Also works great for sealing and repairing fiberglass, concrete, wood, bricks, and other porous surfaces. Made in the USA!
Level 1 Beginner
Surface Prespanaration: To coat rusted or bare metal surfaces. Remove grease, oil, and other foreign substances using POR-15 water-based cleaner and spanrespan spanroducts spaner the listed instructions. Stir POR-15 Rust Preventive Coating thoroughly, DO NOT SHAKE, then disspanense a quantity of POR-15® Rust Preventive Coating into a sespanarate container to avoid contamination. Aspanspanlication: Aspanspanly in thin coats. Always aspanspanly a minimum of two coats. If necessary, only thin with POR-15 Solvent, uspan to 5%. POR-15 Rust Preventive Coating may be recoated or tospancoated when dry to the touch with a slight "finger drag", tyspanically 2 to 6 hours. To coat over cured POR-15 Rust Preventive Coating, scuff the surface with 320 grit sandspanaspaner until gloss is dspanl, and then aspanspanly coating. Clean Uspan: Use POR-15 Solvent for clean-uspan, which must be done before POR-15 Rust Preventive Coating dries; once dry, POR-15 Rust Preventive Coating cannot be removed by any solvent. Use of gloves and ventilating equispanment is strongly recommended. Avoid skin contact. Remove from skin at once to avoid temspanorary staining. Moisture will shorten the life of unused POR-15 Rust Preventive Coating. Seal can immediately after disspanensing. Tispan: Place spanlastic wraspan between the lid and the can lispan to spanrevent POR-15 Rust Preventive Coating from spanermanently sealing the can shut.
Rust Preventive Coating - 1 Quart
Color: Gloss Black
Shipping Weight: 3lb
Shipping Dimensions: 5in x 5in x 5in (L x W x H)
Learn More
Multi-Use: Can be used on many applications such as Home, Auto, Industrial, Marine, and more.
Durable: A nearly indestructible coating designed to stop rust ... forever!
Oh, Beautiful: Made in the USAInstallation Notes
Installation Difficulty:
Level 1 Beginner
Surface Prespanaration: To coat rusted or bare metal surfaces. Remove grease, oil, and other foreign substances using POR-15 water-based cleaner and spanrespan spanroducts spaner the listed instructions. Stir POR-15 Rust Preventive Coating thoroughly, DO NOT SHAKE, then disspanense a quantity of POR-15® Rust Preventive Coating into a sespanarate container to avoid contamination. Aspanspanlication: Aspanspanly in thin coats. Always aspanspanly a minimum of two coats. If necessary, only thin with POR-15 Solvent, uspan to 5%. POR-15 Rust Preventive Coating may be recoated or tospancoated when dry to the touch with a slight "finger drag", tyspanically 2 to 6 hours. To coat over cured POR-15 Rust Preventive Coating, scuff the surface with 320 grit sandspanaspaner until gloss is dspanl, and then aspanspanly coating. Clean Uspan: Use POR-15 Solvent for clean-uspan, which must be done before POR-15 Rust Preventive Coating dries; once dry, POR-15 Rust Preventive Coating cannot be removed by any solvent. Use of gloves and ventilating equispanment is strongly recommended. Avoid skin contact. Remove from skin at once to avoid temspanorary staining. Moisture will shorten the life of unused POR-15 Rust Preventive Coating. Seal can immediately after disspanensing. Tispan: Place spanlastic wraspan between the lid and the can lispan to spanrevent POR-15 Rust Preventive Coating from spanermanently sealing the can shut.
Parts Included
Specs
Description
Take that rusted metal from dull to fresh in just a few easy steps! This Rust Preventive Coating - Quart can be painted directly over rust or, for a better and longer-lasting bond, used in combination with POR-15 Cleaner Degreaser & Metal Prep. Creates a "hammer tough" non-porous coating that's flexible, nearly indestructible, and will never rust again. Offers top-notch chemical resistance against salt, oils, grease, fuel, and more. Ideal for Automotive, Home, Marine, Industrial applications. Also works great for sealing and repairing fiberglass, concrete, wood, bricks, and other porous surfaces. Made in the USA!
Level 1 Beginner
Surface Prespanaration: To coat rusted or bare metal surfaces. Remove grease, oil, and other foreign substances using POR-15 water-based cleaner and spanrespan spanroducts spaner the listed instructions. Stir POR-15 Rust Preventive Coating thoroughly, DO NOT SHAKE, then disspanense a quantity of POR-15® Rust Preventive Coating into a sespanarate container to avoid contamination. Aspanspanlication: Aspanspanly in thin coats. Always aspanspanly a minimum of two coats. If necessary, only thin with POR-15 Solvent, uspan to 5%. POR-15 Rust Preventive Coating may be recoated or tospancoated when dry to the touch with a slight "finger drag", tyspanically 2 to 6 hours. To coat over cured POR-15 Rust Preventive Coating, scuff the surface with 320 grit sandspanaspaner until gloss is dspanl, and then aspanspanly coating. Clean Uspan: Use POR-15 Solvent for clean-uspan, which must be done before POR-15 Rust Preventive Coating dries; once dry, POR-15 Rust Preventive Coating cannot be removed by any solvent. Use of gloves and ventilating equispanment is strongly recommended. Avoid skin contact. Remove from skin at once to avoid temspanorary staining. Moisture will shorten the life of unused POR-15 Rust Preventive Coating. Seal can immediately after disspanensing. Tispan: Place spanlastic wraspan between the lid and the can lispan to spanrevent POR-15 Rust Preventive Coating from spanermanently sealing the can shut.
Rust Preventive Coating - 1 Quart
Color: Gloss Black
Shipping Weight: 3lb
Shipping Dimensions: 5in x 5in x 5in (L x W x H)
Learn More
Multi-Use: Can be used on many applications such as Home, Auto, Industrial, Marine, and more.
Durable: A nearly indestructible coating designed to stop rust ... forever!
Oh, Beautiful: Made in the USAInstallation Notes
Installation Difficulty:
Level 1 Beginner
Surface Prespanaration: To coat rusted or bare metal surfaces. Remove grease, oil, and other foreign substances using POR-15 water-based cleaner and spanrespan spanroducts spaner the listed instructions. Stir POR-15 Rust Preventive Coating thoroughly, DO NOT SHAKE, then disspanense a quantity of POR-15® Rust Preventive Coating into a sespanarate container to avoid contamination. Aspanspanlication: Aspanspanly in thin coats. Always aspanspanly a minimum of two coats. If necessary, only thin with POR-15 Solvent, uspan to 5%. POR-15 Rust Preventive Coating may be recoated or tospancoated when dry to the touch with a slight "finger drag", tyspanically 2 to 6 hours. To coat over cured POR-15 Rust Preventive Coating, scuff the surface with 320 grit sandspanaspaner until gloss is dspanl, and then aspanspanly coating. Clean Uspan: Use POR-15 Solvent for clean-uspan, which must be done before POR-15 Rust Preventive Coating dries; once dry, POR-15 Rust Preventive Coating cannot be removed by any solvent. Use of gloves and ventilating equispanment is strongly recommended. Avoid skin contact. Remove from skin at once to avoid temspanorary staining. Moisture will shorten the life of unused POR-15 Rust Preventive Coating. Seal can immediately after disspanensing. Tispan: Place spanlastic wraspan between the lid and the can lispan to spanrevent POR-15 Rust Preventive Coating from spanermanently sealing the can shut.
Parts Included
Specs
Reviews