ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks with CDEV are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061-billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks with CDEV are fully rebuildable and re-tunable. The ICON CDE Valve upgrade is included for those desiring an easy way to tune the ride electronically from inside the vehicle.
Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV's hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
| Part # | Description |
|---|---|
| IVD-217704EP | ICON 0" Coil / 3" Air Ride Rear 2.5 VS Piggyback CDEV Shocks for 14-UP RAM 2500 Pair |
| IVD-217705EP | ICON .5" Performance Rear 2.5 VS Piggyback CDEV Shocks for 14-UP RAM 2500 Pair |
| IVD-217706EP | ICON 2" Performance Rear 2.5 VS Piggyback CDEV Shocks for 14-UP RAM 2500 Pair |
| IVD-217707EP | ICON 2" STANDARD Rear 2.5 VS Piggyback CDEV Shocks for 14-UP RAM 2500 Pair |
| IVD-217708EP | ICON AIR RIDE Rear 2.5 VS Piggyback CDEV Shocks for 14-UP RAM 2500 Pair |
Features:
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- ICON's internal "Bump Zone" increases damping by 20% to provide more control as the shock approaches full compression
- One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- Piggyback reservoir design improves heat dissipation to reduce shock fade during prolonged use
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 7/8" diameter induction hardened, chrome plated shock shaft
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
- Fully rebuildable and re-tunable
Tech Info:
IVD-217704EP
- Compatible with 0-1" of rear lift over stock on 14-UP Ram 2500 4WD equipped with rear coil springs
- Compatible with 3-4" of rear lift over stock on 14-UP Ram 2500 4WD equipped with OE Automatic-Leveling Rear Air-Suspension system
- Also requires installation of IIC part number 213500 and CDEV front shock part numbers 217802EP or 217803EP
IVD-217705EP
- Only compatible with 14-UP Ram 2500 4WD equipped with ICON .5" Lift Rear Performance Spring Kit
- Not compatible with 14-UP Ram 2500 4WD equipped with OE Automatic-Leveling Rear Air-Suspension system
- Also requires installation of IIC part number 213500 and CDEV front shock part number 217802EP
IVD-217706EP
- Only compatible with 14-UP Ram 2500 4WD equipped with ICON 2" Lift Rear Performance Spring Kit
- Not compatible with 14-UP Ram 2500 4WD equipped with OE Automatic-Leveling Rear Air-Suspension system
- Also requires installation of IIC part number 213500 and CDEV front shock part number 217803EP
IVD-217707EP
- Compatible with 2-3" of rear lift over stock on 14-UP Ram 2500 4WD equipped with rear coil springs
- Not compatible with 14-UP Ram 2500 4WD equipped with OE Automatic-Leveling Rear Air-Suspension system
- Also requires installation of IIC part number 213500 and CDEV front shock part number 217803EP
IVD-217708EP
- Compatible with 0-2" of rear lift over stock on 14-UP Ram 2500 4WD equipped with OE Automatic-Leveling Rear Air-Suspension system
- Not compatible with 14-UP Ram 2500 4WD equipped with rear coil springs
- Also requires installation of IIC part number 213500 and CDEV front shock part number 217802EP
Installation Instructions:
IVD-217704EP
IVD-217705EP
IVD-17706EP
IVD-217707EP
IVD-217708EP - N/A
ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks with CDEV are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061-billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks with CDEV are fully rebuildable and re-tunable. The ICON CDE Valve upgrade is included for those desiring an easy way to tune the ride electronically from inside the vehicle.
Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV's hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
| Part # | Description |
|---|---|
| IVD-217704EP | ICON 0" Coil / 3" Air Ride Rear 2.5 VS Piggyback CDEV Shocks for 14-UP RAM 2500 Pair |
| IVD-217705EP | ICON .5" Performance Rear 2.5 VS Piggyback CDEV Shocks for 14-UP RAM 2500 Pair |
| IVD-217706EP | ICON 2" Performance Rear 2.5 VS Piggyback CDEV Shocks for 14-UP RAM 2500 Pair |
| IVD-217707EP | ICON 2" STANDARD Rear 2.5 VS Piggyback CDEV Shocks for 14-UP RAM 2500 Pair |
| IVD-217708EP | ICON AIR RIDE Rear 2.5 VS Piggyback CDEV Shocks for 14-UP RAM 2500 Pair |
Features:
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- ICON's internal "Bump Zone" increases damping by 20% to provide more control as the shock approaches full compression
- One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- Piggyback reservoir design improves heat dissipation to reduce shock fade during prolonged use
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 7/8" diameter induction hardened, chrome plated shock shaft
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
- Fully rebuildable and re-tunable
Tech Info:
IVD-217704EP
- Compatible with 0-1" of rear lift over stock on 14-UP Ram 2500 4WD equipped with rear coil springs
- Compatible with 3-4" of rear lift over stock on 14-UP Ram 2500 4WD equipped with OE Automatic-Leveling Rear Air-Suspension system
- Also requires installation of IIC part number 213500 and CDEV front shock part numbers 217802EP or 217803EP
IVD-217705EP
- Only compatible with 14-UP Ram 2500 4WD equipped with ICON .5" Lift Rear Performance Spring Kit
- Not compatible with 14-UP Ram 2500 4WD equipped with OE Automatic-Leveling Rear Air-Suspension system
- Also requires installation of IIC part number 213500 and CDEV front shock part number 217802EP
IVD-217706EP
- Only compatible with 14-UP Ram 2500 4WD equipped with ICON 2" Lift Rear Performance Spring Kit
- Not compatible with 14-UP Ram 2500 4WD equipped with OE Automatic-Leveling Rear Air-Suspension system
- Also requires installation of IIC part number 213500 and CDEV front shock part number 217803EP
IVD-217707EP
- Compatible with 2-3" of rear lift over stock on 14-UP Ram 2500 4WD equipped with rear coil springs
- Not compatible with 14-UP Ram 2500 4WD equipped with OE Automatic-Leveling Rear Air-Suspension system
- Also requires installation of IIC part number 213500 and CDEV front shock part number 217803EP
IVD-217708EP
- Compatible with 0-2" of rear lift over stock on 14-UP Ram 2500 4WD equipped with OE Automatic-Leveling Rear Air-Suspension system
- Not compatible with 14-UP Ram 2500 4WD equipped with rear coil springs
- Also requires installation of IIC part number 213500 and CDEV front shock part number 217802EP
Installation Instructions:
IVD-217704EP
IVD-217705EP
IVD-17706EP
IVD-217707EP
IVD-217708EP - N/A
