Even though the rear Falcon Series 3 Piggyback shock absorbers are designed to take a beating with their nearly indestructible hard anodized 6061-T6 aluminum construction, TeraFlex offers this bolt-on HD Rear Shock Skid Plate to give the serious off-roader that extra peace-of-mind. These Heavy Duty Rear Shock Skid Plates for your Wrangler JK are constructed from 1/4" cold rolled steel. Unlike the standard Falcon Bolt On Skid Plates, these are left raw steel for owners who want to weld them on for more strength even thought welding is not required. These skid plates also feature the same Eco-Guard mounting hardware found on Falcon shock absorbers.
Learn More
Constructed from 1/4" cold rolled steel
Eco-Guard mounting hardware passes 1,000-hour salt spray corrosion test
Designed specifically for rear Falcon JK / JKU Series 3 Piggyback Shock Absorbers
Three shock mounting heights possible: Level 1: lower shock mount at stock shock mount height; Level 2: lower shock mount 0.8" higher than stock; or Level 3: lower shock mount 1.6" higher than stock
100% bolt-on installation w/ basic hand tools, but can be welded for additional strength
Raw finish for those who want to weld the skid plates (not required)
Requires cutting of stock lower shock mount
Mounting at Level 2 or Level 3 may affect overall rear axle travel, causing the axle to droop further, which may cause the spring to fall out of place
HD Skid Plate - Left
HD Skid Plate - Right
Installation Hardware
Warranty
Lifetime
Specs
Features:1/4 inch, Steel
Color:Bare Steel
Shipping Weight:13lb
Shipping Dimensions:12in x 12in x 7in (L x W x H)
Fitment
Jeep Wrangler 2-Door (JK)
2018 Jeep Wrangler 2-Door (JK)
2017 Jeep Wrangler 2-Door (JK)
2016 Jeep Wrangler 2-Door (JK)
2015 Jeep Wrangler 2-Door (JK)
2014 Jeep Wrangler 2-Door (JK)
2013 Jeep Wrangler 2-Door (JK)
2012 Jeep Wrangler 2-Door (JK)
2011 Jeep Wrangler 2-Door (JK)
2010 Jeep Wrangler 2-Door (JK)
2009 Jeep Wrangler 2-Door (JK)
2008 Jeep Wrangler 2-Door (JK)
2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
2018 Jeep Wrangler Unlimited 4-Door (JK)
2017 Jeep Wrangler Unlimited 4-Door (JK)
2016 Jeep Wrangler Unlimited 4-Door (JK)
2015 Jeep Wrangler Unlimited 4-Door (JK)
2014 Jeep Wrangler Unlimited 4-Door (JK)
2013 Jeep Wrangler Unlimited 4-Door (JK)
2012 Jeep Wrangler Unlimited 4-Door (JK)
2011 Jeep Wrangler Unlimited 4-Door (JK)
2010 Jeep Wrangler Unlimited 4-Door (JK)
2009 Jeep Wrangler Unlimited 4-Door (JK)
2008 Jeep Wrangler Unlimited 4-Door (JK)
2007 Jeep Wrangler Unlimited 4-Door (JK)
Description
Even though the rear Falcon Series 3 Piggyback shock absorbers are designed to take a beating with their nearly indestructible hard anodized 6061-T6 aluminum construction, TeraFlex offers this bolt-on HD Rear Shock Skid Plate to give the serious off-roader that extra peace-of-mind. These Heavy Duty Rear Shock Skid Plates for your Wrangler JK are constructed from 1/4" cold rolled steel. Unlike the standard Falcon Bolt On Skid Plates, these are left raw steel for owners who want to weld them on for more strength even thought welding is not required. These skid plates also feature the same Eco-Guard mounting hardware found on Falcon shock absorbers.
Learn More
Constructed from 1/4" cold rolled steel
Eco-Guard mounting hardware passes 1,000-hour salt spray corrosion test
Designed specifically for rear Falcon JK / JKU Series 3 Piggyback Shock Absorbers
Three shock mounting heights possible: Level 1: lower shock mount at stock shock mount height; Level 2: lower shock mount 0.8" higher than stock; or Level 3: lower shock mount 1.6" higher than stock
100% bolt-on installation w/ basic hand tools, but can be welded for additional strength
Raw finish for those who want to weld the skid plates (not required)
Requires cutting of stock lower shock mount
Mounting at Level 2 or Level 3 may affect overall rear axle travel, causing the axle to droop further, which may cause the spring to fall out of place
