Proudly Made in the USA.
Don't forget the Airaid Filter Tune-up Kit is essential for keeping the AIRAID® Cold Air Dam Intake clean and free of debris to keep maximum air flow into your engine.
Learn More
Jeep's next generation Wranglers, code named the JK, is all new from the ground up. For `07 and the first time in Jeep® history, the Wrangler will be available in a 4-door model as well as the classic two-door version. Each retains its Trail Rated heritage, utilizing Dana solid axles front and rear with two available Jeep® four-wheel-drive systems.
However, what's new for `07, besides the obvious styling and model changes, is an all new powerplant under the hood. For 2007, a 3.8-liter V6 replaces the venerable 4.0-liter six cylinder which has been offered in the Jeep® vehicle lineup for years.
Living up to our reputation of being first to market with products that make horsepower and torque, AIRAID Premium Filter Company has found a way to unleash more of the 3.8-liter's hidden horsepower and torque with the development of a new Cool Air Dam intake for the `07 Wranglers which includes the Rubicon and Unlimited models as well.
AIRAID's Cool Air Dam system for the 3.8-liter JK features a full-length intake tube and a computer-designed Cool Air Dam which is designed to isolate engine heat away from the air inlet. The heart of the system is AIRAID's Premium SynthaFlow™ filter that allows for both maximum air flow and superior filtration, down to 2 microns, at no extra cost.
The new AIRAID `07 Jeep® Wrangler Cool Air Dam System dramatically improves engine breathing and throttle response. On the chassis dyno, the system also generated an additional 14 horsepower and 24 lb/ft of torque at the rear wheels.
-
SynthaFlow™ Filtration
- From the innovator of composite filter construction
- Filters down to two microns
- SynthaFlow Layer keeps inlet tube oil free
Premium Filtration at no extra cost!
-
Computer Designed Inlet Tube
- Delivers more power in the low to mid-range than mandrel-bent designs
- Seals Hot Air out from the back of the filter for Maximum Power.
-
AIRAID Cool Air Dam Design
- Keeps hot air out and cool air in
- Perfect Fit Every Time
- Durable powder-coated finish
Installation Notes
Level 2 Intermediate
Tools Needed:
5/16", 10mm Socket
Ratchet &amspan; Extension
Phillispans Screwdriver
5/32", 7/32" Allen Wrench
7/16" Wrench
Parts Included
Airaid Intake Tube
MAF Panel
Bottom Panel
Reducing Hump Hose
20" Weather Strip
Hardware & Instructions
Warranty
Specs
Fitment
Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
Proudly Made in the USA.
Don't forget the Airaid Filter Tune-up Kit is essential for keeping the AIRAID® Cold Air Dam Intake clean and free of debris to keep maximum air flow into your engine.
Learn More
Jeep's next generation Wranglers, code named the JK, is all new from the ground up. For `07 and the first time in Jeep® history, the Wrangler will be available in a 4-door model as well as the classic two-door version. Each retains its Trail Rated heritage, utilizing Dana solid axles front and rear with two available Jeep® four-wheel-drive systems.
However, what's new for `07, besides the obvious styling and model changes, is an all new powerplant under the hood. For 2007, a 3.8-liter V6 replaces the venerable 4.0-liter six cylinder which has been offered in the Jeep® vehicle lineup for years.
Living up to our reputation of being first to market with products that make horsepower and torque, AIRAID Premium Filter Company has found a way to unleash more of the 3.8-liter's hidden horsepower and torque with the development of a new Cool Air Dam intake for the `07 Wranglers which includes the Rubicon and Unlimited models as well.
AIRAID's Cool Air Dam system for the 3.8-liter JK features a full-length intake tube and a computer-designed Cool Air Dam which is designed to isolate engine heat away from the air inlet. The heart of the system is AIRAID's Premium SynthaFlow™ filter that allows for both maximum air flow and superior filtration, down to 2 microns, at no extra cost.
The new AIRAID `07 Jeep® Wrangler Cool Air Dam System dramatically improves engine breathing and throttle response. On the chassis dyno, the system also generated an additional 14 horsepower and 24 lb/ft of torque at the rear wheels.
-
SynthaFlow™ Filtration
- From the innovator of composite filter construction
- Filters down to two microns
- SynthaFlow Layer keeps inlet tube oil free
Premium Filtration at no extra cost!
-
Computer Designed Inlet Tube
- Delivers more power in the low to mid-range than mandrel-bent designs
- Seals Hot Air out from the back of the filter for Maximum Power.
-
AIRAID Cool Air Dam Design
- Keeps hot air out and cool air in
- Perfect Fit Every Time
- Durable powder-coated finish
Installation Notes
Level 2 Intermediate
Tools Needed:
5/16", 10mm Socket
Ratchet &amspan; Extension
Phillispans Screwdriver
5/32", 7/32" Allen Wrench
7/16" Wrench
Parts Included
Airaid Intake Tube
MAF Panel
Bottom Panel
Reducing Hump Hose
20" Weather Strip
Hardware & Instructions