This adapter bellhousing assembly is used to adapt the GM 4.3, V8 to the 1986-95 Toyota Truck 5 speed manual. These transmissions are identified as R150F and R151F The 5 speeds were used in the 4cyl turbo trucks and the 3.0 V6 trucks.
The bellhousing kit includes a 356 T-6 aluminum bellhousing, universal dust cover plate, pilot bushing, throw-out arm, slave cylinder push rod, slave cylinder push rod end, ball pivot, fastening hardware, and adapter instructions.
Adapter Type:
- Full Bellhousing
Engine:
- Chevy Small Block V8 & 4.3L V6 (1986 and up)
- Chevy Small Block V8 & 4.3L V6 (pre 1986)
Transmission:
- Toyota Truck R150F
- Toyota Truck R151F
Requited Options:
- AAI-716213 Slave Cylinder
- AAI-716105 10.5" Clutch Disc
- AAI-N1430 Throw-Out Bearing
- AAI-CF360056 10.5" Pressure Plate
Note:
- When using a 168th flywheel on your GM engine a gear reduction starter is required, AA offer gear reduction starts (AAI-22-0001 & AAI-22-0003).
- In addition, you will need a slave cylinder spacer (AAI-22-0001S), and the throw-out arm included in the kit (AAI-716179) will need to be exchanged for a new throw-out arm (AAI-716179V)
- GM 4.3 V6 conversion applications with a 168th flywheel will experience header interference with the slave cylinder & throw-out arm; at that time, it is recommended that a muffler shop custom make an exhaust down pipe
This adapter bellhousing assembly is used to adapt the GM 4.3, V8 to the 1986-95 Toyota Truck 5 speed manual. These transmissions are identified as R150F and R151F The 5 speeds were used in the 4cyl turbo trucks and the 3.0 V6 trucks.
The bellhousing kit includes a 356 T-6 aluminum bellhousing, universal dust cover plate, pilot bushing, throw-out arm, slave cylinder push rod, slave cylinder push rod end, ball pivot, fastening hardware, and adapter instructions.
Adapter Type:
- Full Bellhousing
Engine:
- Chevy Small Block V8 & 4.3L V6 (1986 and up)
- Chevy Small Block V8 & 4.3L V6 (pre 1986)
Transmission:
- Toyota Truck R150F
- Toyota Truck R151F
Requited Options:
- AAI-716213 Slave Cylinder
- AAI-716105 10.5" Clutch Disc
- AAI-N1430 Throw-Out Bearing
- AAI-CF360056 10.5" Pressure Plate
Note:
- When using a 168th flywheel on your GM engine a gear reduction starter is required, AA offer gear reduction starts (AAI-22-0001 & AAI-22-0003).
- In addition, you will need a slave cylinder spacer (AAI-22-0001S), and the throw-out arm included in the kit (AAI-716179) will need to be exchanged for a new throw-out arm (AAI-716179V)
- GM 4.3 V6 conversion applications with a 168th flywheel will experience header interference with the slave cylinder & throw-out arm; at that time, it is recommended that a muffler shop custom make an exhaust down pipe
