These sturdy weld-in engine mounts allow the installer to fine-tune the engine placement according to transmission placement or other needs. A double rubber cushion on each side provides vibration isolation at the ends of the two mounts. The rubber cushions are secured with a large 5/8" diameter bolt. The engine side mounts have holes in them so you can position the engine closer to one side of the frame.
Use this engine mount kit to install a GM V8 or 4.3L V6 into your Jeep listed below. Note that some newer engines will require an additional mounting or an alternate mounting kit.
The engine mount kit includes two engine side mounts, two weld-in gusseted frame mounts, and rubber mount kit.
Style:- Weld In
- Chevy 4.3 & 229
- Small Block Chevy V8
- Jeep C101 Jeepster Comando (66-71)
- Jeep C104 Jeepster Comando (71-72)
- Jeep CJ2A (45-49)
- Jeep CJ3B (52-68)
- Jeep CJ5 (53-71)
- Jeep CJ6 (56-71)
- Jeep JV Jeepster (48-50)
- Jeep M38A1 (52-57)
- Jeep MB (41-45)
Note:
This engine mount kit can be used with All GM V8's & 4.3 V6 with a triangular / 3-bolt boss on the engine block.
If using a new Gen III / IV , LS-Series V8, please use the engine mounting accessory 713088
These sturdy weld-in engine mounts allow the installer to fine-tune the engine placement according to transmission placement or other needs. A double rubber cushion on each side provides vibration isolation at the ends of the two mounts. The rubber cushions are secured with a large 5/8" diameter bolt. The engine side mounts have holes in them so you can position the engine closer to one side of the frame.
Use this engine mount kit to install a GM V8 or 4.3L V6 into your Jeep listed below. Note that some newer engines will require an additional mounting or an alternate mounting kit.
The engine mount kit includes two engine side mounts, two weld-in gusseted frame mounts, and rubber mount kit.
Style:- Weld In
- Chevy 4.3 & 229
- Small Block Chevy V8
- Jeep C101 Jeepster Comando (66-71)
- Jeep C104 Jeepster Comando (71-72)
- Jeep CJ2A (45-49)
- Jeep CJ3B (52-68)
- Jeep CJ5 (53-71)
- Jeep CJ6 (56-71)
- Jeep JV Jeepster (48-50)
- Jeep M38A1 (52-57)
- Jeep MB (41-45)
Note:
This engine mount kit can be used with All GM V8's & 4.3 V6 with a triangular / 3-bolt boss on the engine block.
If using a new Gen III / IV , LS-Series V8, please use the engine mounting accessory 713088
