These sturdy weld-in engine mounts allow the installer to fine-tune the engine placement according to transmission placement or other needs. A double rubber cushion on each side provides vibration isolation at the ends of the two mounts. The rubber cushions are secured with a large 5/8" diameter bolt. The engine side mounts have holes in them so you can position the engine closer to one side of the frame.
The engine mount kit includes two engine side mounts, two weld-in gusseted frame mounts, A/C compressor bracket and rubber mount kit.
Style:
- Weld In
Engine:
- Chevy Small Block V8 (LT1)
Vehicle:
- Jeep C101 Jeepster Comando (66-71)
- Jeep C104 Jeepster Comando (71-72)
- Jeep CJ10 (81-85)
- Jeep CJ2A (45-49)
- Jeep CJ3B (52-68)
- Jeep CJ5 (53-71)
- Jeep CJ5 (72-86)
- Jeep CJ6 (56-71)
- Jeep CJ6 (72-75)
- Jeep CJ7 (76-86)
- Jeep CJ8 (81-86)
- Jeep Grand Wagoneer (72-84)
- Jeep J series Truck (81-85)
- Jeep JV Jeepster (48-50)
- Jeep M38A1 (52-57)
- Jeep MB (41-45)
- Jeep SJ Cherokee (72-84)
- Jeep Wagoneer (72-84)
- Jeep Willys Wagon (46-65)
- Jeep YJ (87-95)
 | Installation Instructions |
Notes:
A/C bracket fits Camaro / Trans-Am / Caprice LT1's with 8 o'clock position A/C compressor
713005 are used with all GM LT1 If using a new Gen III / IV, LS-Series V8, please see P/N 713088
These sturdy weld-in engine mounts allow the installer to fine-tune the engine placement according to transmission placement or other needs. A double rubber cushion on each side provides vibration isolation at the ends of the two mounts. The rubber cushions are secured with a large 5/8" diameter bolt. The engine side mounts have holes in them so you can position the engine closer to one side of the frame.
The engine mount kit includes two engine side mounts, two weld-in gusseted frame mounts, A/C compressor bracket and rubber mount kit.
Style:
- Weld In
Engine:
- Chevy Small Block V8 (LT1)
Vehicle:
- Jeep C101 Jeepster Comando (66-71)
- Jeep C104 Jeepster Comando (71-72)
- Jeep CJ10 (81-85)
- Jeep CJ2A (45-49)
- Jeep CJ3B (52-68)
- Jeep CJ5 (53-71)
- Jeep CJ5 (72-86)
- Jeep CJ6 (56-71)
- Jeep CJ6 (72-75)
- Jeep CJ7 (76-86)
- Jeep CJ8 (81-86)
- Jeep Grand Wagoneer (72-84)
- Jeep J series Truck (81-85)
- Jeep JV Jeepster (48-50)
- Jeep M38A1 (52-57)
- Jeep MB (41-45)
- Jeep SJ Cherokee (72-84)
- Jeep Wagoneer (72-84)
- Jeep Willys Wagon (46-65)
- Jeep YJ (87-95)
| Installation Instructions |
Notes:
A/C bracket fits Camaro / Trans-Am / Caprice LT1's with 8 o'clock position A/C compressor
713005 are used with all GM LT1 If using a new Gen III / IV, LS-Series V8, please see P/N 713088
