| Part # | Description |
|---|---|
| AAI-50-3202 | Advance Adapters GM 2WD T400 to GM NP205 Transmission / Transfer Case Adapter |
| AAI-50-3203 | Advance Adapters GM 4WD T400 to GM NP205 Transmission / Transfer Case Adapter |
| AAI-50-3204 | Advance Adapters GM 2WD T400 to FORD NP205 Transmission / Transfer Case Adapter |
AAI-50-3202
This kit will adapt a TH400 2WD automatic to the GM NP205 transfer case and only be used when replacing a SM465 4 speed manual or a TH350 automatic transmission. The kit includes a new TH400 to NP205 adapter, linkage rod, bracket, NP205 input gear with 32 internal spline, brake yoke, soft plug, bearing, snap ring, NP205 gasket, adapter seal, fastening hardware and adapter instructions.
Transfer Case
The NP205 originally coupled to a TH350 has a male 27 spline input. The NP205 is a part time, cast iron transfer case with a figure eight front bolt pattern configuration. This assembly was used in 1971-79 vehicles.
The NP205 originally coupled to a SM465 4 speed manual transmission has a male 10 spline input. The NP205 is a part time, cast iron transfer case with a figure eight front bolt pattern configuration. This assembly was used in 1971-84 vehicles.
The transfer case will need to be machined to accept the larger diameter input bearing that is supplied with this kit.
Transmission
This adapter kit is designed for exclusive use with the GM TH400 automatic transmission in 2wd output of 4.5" stickout. The TH400 has a case length of 24.250" and a "Texas-shaped" oil pan underneath it. The factory output shaft has a spline count of 32 spline and had various output lengths. This kit cannot be used with TH400 shafts that measure 1.5 or 2.5" stickouts. see kit PN50-3203
Includes:
- ADAPTER- TH400 TO NP205 / 51-3202
- GM T400/4L80E 862-4709 GASKET / 716510
- GASKET-73-79 NP205 LARGE BORE / 716572
- SEAL-NATIONAL 4435 / 716754
- NUT 3/8 -16 PLATED GRD 5 / 723701
- LOCK WASHER 3/8 ZINC / 723704
- STUD BOLT 3/8 -16 X 2 LG B7 / 723711
- GEAR- NP205 INPUT 46T / 52-9600
- SHAFT- NP205 INPUT 32T SHORT / 52-9602
- SNAP RING-EXTERNAL 1 15/16 / 716467
- SNAP-RING EXT INPUT GEAR NP / 340407
- BEARING 6210NR-T/C INPUT GEAR BEARING / 716320
AAI-50-3203
This kit will adapt a TH400 4WD (2.5" Output stickout) automatic to the GM NP205 transfer case and only be used when replacing a SM465 4 speed manual or a TH350 automatic transmission. The kit includes a new TH400 to NP205 adapter, linkage rod, bracket, NP205 long input gear with 32 internal spline, brake yoke, soft plug, bearing, snap ring, NP205 gasket, adapter seal, fastening hardware and adapter instructions.
Transfer Case
The NP205 originally coupled to a TH350 has a male 27 spline input. The NP205 is a part time, cast iron transfer case with a figure eight front bolt pattern configuration. This assembly was used in 1971-79 vehicles.
The NP205 originally coupled to a SM465 4 speed manual transmission has a male 10 spline input. The NP205 is a part time, cast iron transfer case with a figure eight front bolt pattern configuration. This assembly was used in 1971-84 vehicles.
The transfer case will need to be machined to accept the larger diameter input bearing that is supplied with this kit.
Transmission
This adapter kit is designed for exclusive use with the GM TH400 automatic transmission in 4wd output of 2.5" stickout. The TH400 has a case length of 24.250" and a "Texas-shaped" oil pan underneath it. The factory output shaft has a spline count of 32 spline and had various output lengths. This kit cannot be used with TH400 shafts that measure 1.5" stickouts.
Includes:
- ADAPTER- TH400 TO NP205 / 51-3202
- GM T400/4L80E 862-4709 GASKET / 716510
- GASKET-73-79 NP205 LARGE BORE / 716572
- SEAL-NATIONAL 4435 / 716754
- NUT 3/8 -16 PLATED GRD 5 / 723701
- LOCK WASHER 3/8 ZINC / 723704
- STUD BOLT 3/8 -16 X 2 LG B7 / 723711
- GEAR- NP205 INPUT 46T / 52-9600
- SHAFT- NP205 INPUT 32T LONG / 52-9603
- SNAP RING-EXTERNAL 1 15/16 / 716467
- SNAP-RING EXT INPUT GEAR NP / 340407
- BEARING 6210NR-T/C INPUT GEAR BEARING / 716320
AAI-50-3204
The GM TH400 adapter to the Ford NP205 transfer case is a 4.232". The adapter material is 356 T-6 heat treated aluminum alloy and the adapter has a provision for a transmission. The adapter kit includes a adapter housing, NP205 input gear with 32 internal spline, soft plug, new input bearing, snap ring, seal, gaskets, fastening hardware and adapter instructions.
Transfer Case
This adapter assembly fits the Ford NP205 part time transfer case. The Ford version is a part time, cast iron and offers a 31 spline female input gear, circular six front bolt pattern and a driver's side front out put shaft.
Transmission
This adapter kit is designed for exclusive use with the GM TH400 automatic transmission. The TH400 has a case length of 24.250" and a "Texas-shaped" oil pan underneath it. The factory output shaft has a spline count of 32 spline and had various output stick-out lengths / 1.5", 2.5", 4.5" & 5" stick-outs.
Only TH400 with the 4.5" and 5" output shaft stickout lengths can be used with this adapter kit.
Includes:
- ADAPTER- TH400 TO FORD NP205 / 51-3204
- FREEZE PLUG 1.937 / 716165
- GM T400/4L80E 862-4709 GASKET / 716510
- GASKET-N.P.208 TRANSFER CASE / 716517
- NUT 3/8 -16 PLATED GRD 5 / 723701
- LOCK WASHER 3/8 ZINC / 723704
- STUD BOLT 3/8 -16 X 2 LG B7 / 723711
- SNAP-RING EXT INPUT GEAR NP / 340407
- GEAR- NP205 INPUT 46T / 52-9600
- SHAFT- NP205 INPUT 32T SHORT / 52-9602
- BEARING 6210-T/C INPUT GEAR BEARING / 716315
- SNAP RING-EXTERNAL 1 15/16 / 716467
| Part # | Description |
|---|---|
| AAI-50-3202 | Advance Adapters GM 2WD T400 to GM NP205 Transmission / Transfer Case Adapter |
| AAI-50-3203 | Advance Adapters GM 4WD T400 to GM NP205 Transmission / Transfer Case Adapter |
| AAI-50-3204 | Advance Adapters GM 2WD T400 to FORD NP205 Transmission / Transfer Case Adapter |
AAI-50-3202
This kit will adapt a TH400 2WD automatic to the GM NP205 transfer case and only be used when replacing a SM465 4 speed manual or a TH350 automatic transmission. The kit includes a new TH400 to NP205 adapter, linkage rod, bracket, NP205 input gear with 32 internal spline, brake yoke, soft plug, bearing, snap ring, NP205 gasket, adapter seal, fastening hardware and adapter instructions.
Transfer Case
The NP205 originally coupled to a TH350 has a male 27 spline input. The NP205 is a part time, cast iron transfer case with a figure eight front bolt pattern configuration. This assembly was used in 1971-79 vehicles.
The NP205 originally coupled to a SM465 4 speed manual transmission has a male 10 spline input. The NP205 is a part time, cast iron transfer case with a figure eight front bolt pattern configuration. This assembly was used in 1971-84 vehicles.
The transfer case will need to be machined to accept the larger diameter input bearing that is supplied with this kit.
Transmission
This adapter kit is designed for exclusive use with the GM TH400 automatic transmission in 2wd output of 4.5" stickout. The TH400 has a case length of 24.250" and a "Texas-shaped" oil pan underneath it. The factory output shaft has a spline count of 32 spline and had various output lengths. This kit cannot be used with TH400 shafts that measure 1.5 or 2.5" stickouts. see kit PN50-3203
Includes:
- ADAPTER- TH400 TO NP205 / 51-3202
- GM T400/4L80E 862-4709 GASKET / 716510
- GASKET-73-79 NP205 LARGE BORE / 716572
- SEAL-NATIONAL 4435 / 716754
- NUT 3/8 -16 PLATED GRD 5 / 723701
- LOCK WASHER 3/8 ZINC / 723704
- STUD BOLT 3/8 -16 X 2 LG B7 / 723711
- GEAR- NP205 INPUT 46T / 52-9600
- SHAFT- NP205 INPUT 32T SHORT / 52-9602
- SNAP RING-EXTERNAL 1 15/16 / 716467
- SNAP-RING EXT INPUT GEAR NP / 340407
- BEARING 6210NR-T/C INPUT GEAR BEARING / 716320
AAI-50-3203
This kit will adapt a TH400 4WD (2.5" Output stickout) automatic to the GM NP205 transfer case and only be used when replacing a SM465 4 speed manual or a TH350 automatic transmission. The kit includes a new TH400 to NP205 adapter, linkage rod, bracket, NP205 long input gear with 32 internal spline, brake yoke, soft plug, bearing, snap ring, NP205 gasket, adapter seal, fastening hardware and adapter instructions.
Transfer Case
The NP205 originally coupled to a TH350 has a male 27 spline input. The NP205 is a part time, cast iron transfer case with a figure eight front bolt pattern configuration. This assembly was used in 1971-79 vehicles.
The NP205 originally coupled to a SM465 4 speed manual transmission has a male 10 spline input. The NP205 is a part time, cast iron transfer case with a figure eight front bolt pattern configuration. This assembly was used in 1971-84 vehicles.
The transfer case will need to be machined to accept the larger diameter input bearing that is supplied with this kit.
Transmission
This adapter kit is designed for exclusive use with the GM TH400 automatic transmission in 4wd output of 2.5" stickout. The TH400 has a case length of 24.250" and a "Texas-shaped" oil pan underneath it. The factory output shaft has a spline count of 32 spline and had various output lengths. This kit cannot be used with TH400 shafts that measure 1.5" stickouts.
Includes:
- ADAPTER- TH400 TO NP205 / 51-3202
- GM T400/4L80E 862-4709 GASKET / 716510
- GASKET-73-79 NP205 LARGE BORE / 716572
- SEAL-NATIONAL 4435 / 716754
- NUT 3/8 -16 PLATED GRD 5 / 723701
- LOCK WASHER 3/8 ZINC / 723704
- STUD BOLT 3/8 -16 X 2 LG B7 / 723711
- GEAR- NP205 INPUT 46T / 52-9600
- SHAFT- NP205 INPUT 32T LONG / 52-9603
- SNAP RING-EXTERNAL 1 15/16 / 716467
- SNAP-RING EXT INPUT GEAR NP / 340407
- BEARING 6210NR-T/C INPUT GEAR BEARING / 716320
AAI-50-3204
The GM TH400 adapter to the Ford NP205 transfer case is a 4.232". The adapter material is 356 T-6 heat treated aluminum alloy and the adapter has a provision for a transmission. The adapter kit includes a adapter housing, NP205 input gear with 32 internal spline, soft plug, new input bearing, snap ring, seal, gaskets, fastening hardware and adapter instructions.
Transfer Case
This adapter assembly fits the Ford NP205 part time transfer case. The Ford version is a part time, cast iron and offers a 31 spline female input gear, circular six front bolt pattern and a driver's side front out put shaft.
Transmission
This adapter kit is designed for exclusive use with the GM TH400 automatic transmission. The TH400 has a case length of 24.250" and a "Texas-shaped" oil pan underneath it. The factory output shaft has a spline count of 32 spline and had various output stick-out lengths / 1.5", 2.5", 4.5" & 5" stick-outs.
Only TH400 with the 4.5" and 5" output shaft stickout lengths can be used with this adapter kit.
Includes:
- ADAPTER- TH400 TO FORD NP205 / 51-3204
- FREEZE PLUG 1.937 / 716165
- GM T400/4L80E 862-4709 GASKET / 716510
- GASKET-N.P.208 TRANSFER CASE / 716517
- NUT 3/8 -16 PLATED GRD 5 / 723701
- LOCK WASHER 3/8 ZINC / 723704
- STUD BOLT 3/8 -16 X 2 LG B7 / 723711
- SNAP-RING EXT INPUT GEAR NP / 340407
- GEAR- NP205 INPUT 46T / 52-9600
- SHAFT- NP205 INPUT 32T SHORT / 52-9602
- BEARING 6210-T/C INPUT GEAR BEARING / 716315
- SNAP RING-EXTERNAL 1 15/16 / 716467
