Run multiple accessories and auxiliary lights with the Trigger Solid State Bluetooth 6 Relay Switching System for your Jeep Wrangler JL. This system allows you to control up to 3 circuits without creating a mess of wiring under your hood. No wiring needs to be routed through the firewall, and no cutting or drilling is required for installation. The included 6 switch controller uses RF to operate the control module. Trigger has also developed a free accessory control App for iPhone, and Android phones. The App will allow users to control lighting functions from outside the vehicle via Bluetooth. All necessary wiring and hardware is included for the installation. This kit includes the overhead custom switch mount, underhood mount, 53 inch Y connector harness, and 3 of the male-female connector kits.
Please note: If your JL Wrangler or JT Gladiator is equipped with the adaptive cruise control sensor package this mount will not fit.
Note: Does not fit 3.0L EcoDiesel equipped modelsLearn More
Bluetooth Capable: The Included Bluetooth Capable Control Box Mounts Out of the Way in The Engine Bay, and Eliminates the Need to Run Wires Through the Firewall and into the Dash. No More Messy Wiring! Go Even Further and Mount Several Control Boxes Together and Wireless Control Up to 24 Accessories! The Internal RF Remote Mounts Inside the Jeeps Cabin and Has Easy to Read, Back-Lit Buttons That Operate all Accessories Easily.
Total Control: Apps Are Available for Both iOs & Android Phones That Give the Capability for Turning On and Off Accessories All With a Simple, Easy to Use Interface. The App Will Stay On While In Use and Plugged into a Power Source. The App Also Allows for Strobe, Dimming, and On/Off Functions.
Multiple Features: The Bluetooth Relay Control Box is an All Solid State, 6 Channel (2x30 & 2x10 & 2x5 Amp Circuits), 12-24 Volt System That is Protected by the Waterproof Aluminum Housing and Installed Under the Hood and Out of Sight. The Control Box Has LED Indicators that Can Tell If a Fuse is Bad or Blown.
Under Hood Mount: The Trigger Under Hood Mount is designed to mount the Trigger Solid State Relay Switching System under the hood of the vehicle. Choose the correct application for your vehicle.
Overhead Switch Pod:The Trigger Overhead Mounting System is the perfect option of mounting the Switch Remote that is included in the Trigger Solid State Relay Switching System. The Mounting system installs on the interior of the Jeep JL , with a non drill installation.
Wiring Harness: The Trigger Male/Female Connector set can extend the reach of the Trigger Accessory Control System even further. The set includes enough items to assemble twos complete male/female pairs of waterproof connectors. The 53 inch long "Y" wiring harness is used to expand the connectivity of the Trigger Accessory Control System. The harness is a great option for the wiring of A-Pillar light Pods and bumper lights while using only one circuit. The waterproof harness includes one female connector, and two male connectors.Installation Notes
Level 2 Intermediate
Please note: If your JL Wrangler or JT Gladiator is equipped with the adaptive cruise control sensor package this mount will not fit.
Parts Included
Warranty
Specs
Fitment
Jeep Gladiator (JT)
Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
Run multiple accessories and auxiliary lights with the Trigger Solid State Bluetooth 6 Relay Switching System for your Jeep Wrangler JL. This system allows you to control up to 3 circuits without creating a mess of wiring under your hood. No wiring needs to be routed through the firewall, and no cutting or drilling is required for installation. The included 6 switch controller uses RF to operate the control module. Trigger has also developed a free accessory control App for iPhone, and Android phones. The App will allow users to control lighting functions from outside the vehicle via Bluetooth. All necessary wiring and hardware is included for the installation. This kit includes the overhead custom switch mount, underhood mount, 53 inch Y connector harness, and 3 of the male-female connector kits.
Please note: If your JL Wrangler or JT Gladiator is equipped with the adaptive cruise control sensor package this mount will not fit.
Note: Does not fit 3.0L EcoDiesel equipped modelsLearn More
Bluetooth Capable: The Included Bluetooth Capable Control Box Mounts Out of the Way in The Engine Bay, and Eliminates the Need to Run Wires Through the Firewall and into the Dash. No More Messy Wiring! Go Even Further and Mount Several Control Boxes Together and Wireless Control Up to 24 Accessories! The Internal RF Remote Mounts Inside the Jeeps Cabin and Has Easy to Read, Back-Lit Buttons That Operate all Accessories Easily.
Total Control: Apps Are Available for Both iOs & Android Phones That Give the Capability for Turning On and Off Accessories All With a Simple, Easy to Use Interface. The App Will Stay On While In Use and Plugged into a Power Source. The App Also Allows for Strobe, Dimming, and On/Off Functions.
Multiple Features: The Bluetooth Relay Control Box is an All Solid State, 6 Channel (2x30 & 2x10 & 2x5 Amp Circuits), 12-24 Volt System That is Protected by the Waterproof Aluminum Housing and Installed Under the Hood and Out of Sight. The Control Box Has LED Indicators that Can Tell If a Fuse is Bad or Blown.
Under Hood Mount: The Trigger Under Hood Mount is designed to mount the Trigger Solid State Relay Switching System under the hood of the vehicle. Choose the correct application for your vehicle.
Overhead Switch Pod:The Trigger Overhead Mounting System is the perfect option of mounting the Switch Remote that is included in the Trigger Solid State Relay Switching System. The Mounting system installs on the interior of the Jeep JL , with a non drill installation.
Wiring Harness: The Trigger Male/Female Connector set can extend the reach of the Trigger Accessory Control System even further. The set includes enough items to assemble twos complete male/female pairs of waterproof connectors. The 53 inch long "Y" wiring harness is used to expand the connectivity of the Trigger Accessory Control System. The harness is a great option for the wiring of A-Pillar light Pods and bumper lights while using only one circuit. The waterproof harness includes one female connector, and two male connectors.Installation Notes
Level 2 Intermediate
Please note: If your JL Wrangler or JT Gladiator is equipped with the adaptive cruise control sensor package this mount will not fit.
