If you pulled your rear drive shaft out on your last wheeling trip from too much flexing , or you broke an eye on your yoke, the Crown Automotive Rear Slip Yoke will have you fixed up in a hurry. For Jeeps from 1996-2006 with an NP231 or NP242 transfer case, this yoke replaces the original yoke that connects to the rear drive shaft. In extreme cases, when the length of the drive shaft is too short, you can pull the yoke from the housing and your drive shaft drops. Chances are pretty good that during the fall the yoke will be damaged. Replace it with a new yoke to assure that the surfaces are smooth and true and will not cut up the seals.
2.5" of slip
6" from center of u-joint to end
26 Splines
Uses a Spicer 1310 Series (3.219" O.D.) Universal Joint
Transfer Case Model: NP231, NP242
Shipping Weight: 3lb
Shipping Dimensions: 8in x 4in x 3in (L x W x H)
2001 Jeep Cherokee (XJ)
2000 Jeep Cherokee (XJ)
1999 Jeep Cherokee (XJ)
1998 Jeep Cherokee (XJ)
1997 Jeep Cherokee (XJ)
1996 Jeep Cherokee (XJ)
2000 Jeep Grand Cherokee (WJ)
1999 Jeep Grand Cherokee (WJ)
1998 Jeep Grand Cherokee (ZJ)
1997 Jeep Grand Cherokee (ZJ)
1996 Jeep Grand Cherokee (ZJ)
2006 Jeep Wrangler (TJ)
2005 Jeep Wrangler (TJ)
2004 Jeep Wrangler (TJ)
2003 Jeep Wrangler (TJ)
2002 Jeep Wrangler (TJ)
2001 Jeep Wrangler (TJ)
2000 Jeep Wrangler (TJ)
1999 Jeep Wrangler (TJ)
1998 Jeep Wrangler (TJ)
1997 Jeep Wrangler (TJ)
2006 Jeep Wrangler Unlimited (LJ)
2005 Jeep Wrangler Unlimited (LJ)
2004 Jeep Wrangler Unlimited (LJ)
Learn More
Original Replacement: Direct fit for NP231 and 242 transfer cases that are still stock and do not have a Slip Yoke Eliminator installed for vehicles with a suspension lift.
Stock Drive Shafts: Accepts u-joint from stock sized 1310 driveshafts
2.5" of slip
6" from center of u-joint to end
26 Splines
Uses a Spicer 1310 Series (3.219" O.D.) Universal Joint
Specs
Fitment
Jeep Cherokee (XJ)
Jeep Grand Cherokee (WJ)
Jeep Grand Cherokee (ZJ)
Jeep Wrangler (TJ)
Jeep Wrangler Unlimited (LJ)
Description
If you pulled your rear drive shaft out on your last wheeling trip from too much flexing , or you broke an eye on your yoke, the Crown Automotive Rear Slip Yoke will have you fixed up in a hurry. For Jeeps from 1996-2006 with an NP231 or NP242 transfer case, this yoke replaces the original yoke that connects to the rear drive shaft. In extreme cases, when the length of the drive shaft is too short, you can pull the yoke from the housing and your drive shaft drops. Chances are pretty good that during the fall the yoke will be damaged. Replace it with a new yoke to assure that the surfaces are smooth and true and will not cut up the seals.
2.5" of slip
6" from center of u-joint to end
26 Splines
Uses a Spicer 1310 Series (3.219" O.D.) Universal Joint
Transfer Case Model: NP231, NP242
Shipping Weight: 3lb
Shipping Dimensions: 8in x 4in x 3in (L x W x H)
2001 Jeep Cherokee (XJ)
2000 Jeep Cherokee (XJ)
1999 Jeep Cherokee (XJ)
1998 Jeep Cherokee (XJ)
1997 Jeep Cherokee (XJ)
1996 Jeep Cherokee (XJ)
2000 Jeep Grand Cherokee (WJ)
1999 Jeep Grand Cherokee (WJ)
1998 Jeep Grand Cherokee (ZJ)
1997 Jeep Grand Cherokee (ZJ)
1996 Jeep Grand Cherokee (ZJ)
2006 Jeep Wrangler (TJ)
2005 Jeep Wrangler (TJ)
2004 Jeep Wrangler (TJ)
2003 Jeep Wrangler (TJ)
2002 Jeep Wrangler (TJ)
2001 Jeep Wrangler (TJ)
2000 Jeep Wrangler (TJ)
1999 Jeep Wrangler (TJ)
1998 Jeep Wrangler (TJ)
1997 Jeep Wrangler (TJ)
2006 Jeep Wrangler Unlimited (LJ)
2005 Jeep Wrangler Unlimited (LJ)
2004 Jeep Wrangler Unlimited (LJ)
Learn More
Original Replacement: Direct fit for NP231 and 242 transfer cases that are still stock and do not have a Slip Yoke Eliminator installed for vehicles with a suspension lift.
Stock Drive Shafts: Accepts u-joint from stock sized 1310 driveshafts
2.5" of slip
6" from center of u-joint to end
26 Splines
Uses a Spicer 1310 Series (3.219" O.D.) Universal Joint
Specs
Fitment
Jeep Cherokee (XJ)
Jeep Grand Cherokee (WJ)
Jeep Grand Cherokee (ZJ)
Jeep Wrangler (TJ)
Jeep Wrangler Unlimited (LJ)
Reviews