The rear EVO MFG Double ThrowDown System is engineered for the Jeep owners who like to go fast. This system utilizes a coilover just like EVO MFG's EVOlever and has all the same added benefits, as well as an additional bypass shock each corner. With the addition of a bypass shock you have full external adjustability of the damping and "zones" within the shock stroke that allow the system to be position sensitive. This system gives you 14" of positions sensitive damping without the need for cutting holes in the body of your Jeep.
EVO MFG is now shipping the rear EVOlever and Double ThrowDown sub frames with the bushing and pivot points preassembled and lubricated .This simple process will help ease the install and insure proper set up of the pivot points. Now the installer will be able to install this product faster which means you can enjoy all these great benefits of the EVOlever sooner.
Proudly Made 100% In USA.
Allows the uses of long travel coilover and external bypass shocks in the rear of your JK without the need for doing any major cutting.
Absolutely no cutting of the body.
Offers up to 14Β of vertical wheel travel.
Optimizes Short Arm and Long Arm suspension system, from every manufacturer without modification. (Rancho Long Arm/Rock Krawler needs modification)
Offers the maximum amount of ground clearance with 14" travel. All key components fully protected and above axle at all times.
Adjustable ride height.
Four Ply limit strap included
3/4"chromoly heim joints.
Stainless steel misalignments.
Grade 8 hardware
Allows for use of 35Β up to 42Β tires (Larger than 37", Body Trimming required)
Level 4 Experts Only
Exhaust modifications required.
1 Driver Side Double ThrowDown Arm
1 Passenger Side Double ThrowDown Arm
1 DTD EVOlever Subframe
2 King Coilover Shocks
2 King Bypass Shocks
1 Canti Track Bracket
1 Driver Side Heim Mount Bracket
1 EVOlever Frame Side Trackbar Relocation Bracket
2 Cantilever Arm End Link Tubes
2 3/4" Male RH Heim Joints
2 3/4" Male LH Heim Joints
2 3/4" Right Hand Hex Jam Nuts
2 3/4" Left Hand Hex Jam Nuts
8 3/4" Misalignment Spacers
8 Hose Clamps
8 Tabs
2 20" Limit Straps
2 Cross Braces in Clear Zinc
4 5/8" Misalignment Spacers
4 5/8" Male RH Heim Joints
4 5/8" Right Hand Hex Jam Nuts
4 Cantilever Bushings
Installation Hardware
Limited Lifetime Warranty.
Features: Coil Over
Shocks Included: With Shocks
Max Tire Size: 42
Lift Height Range: 3 - 4.5 inch
Included Parts: Coil Springs, Control Arm Brackets, Extended Brake Lines, Extended Sway Bars, Hardware
Shipping Weight: 182lb
Shipping Dimensions: 81in x 37in x 22in (L x W x H)
2018 Jeep Wrangler 2-Door (JK)
2017 Jeep Wrangler 2-Door (JK)
2016 Jeep Wrangler 2-Door (JK)
2015 Jeep Wrangler 2-Door (JK)
2014 Jeep Wrangler 2-Door (JK)
2013 Jeep Wrangler 2-Door (JK)
2012 Jeep Wrangler 2-Door (JK)
2011 Jeep Wrangler 2-Door (JK)
2010 Jeep Wrangler 2-Door (JK)
2009 Jeep Wrangler 2-Door (JK)
2008 Jeep Wrangler 2-Door (JK)
2007 Jeep Wrangler 2-Door (JK)
2018 Jeep Wrangler Unlimited 4-Door (JK)
2017 Jeep Wrangler Unlimited 4-Door (JK)
2016 Jeep Wrangler Unlimited 4-Door (JK)
2015 Jeep Wrangler Unlimited 4-Door (JK)
2014 Jeep Wrangler Unlimited 4-Door (JK)
2013 Jeep Wrangler Unlimited 4-Door (JK)
2012 Jeep Wrangler Unlimited 4-Door (JK)
2011 Jeep Wrangler Unlimited 4-Door (JK)
2010 Jeep Wrangler Unlimited 4-Door (JK)
2009 Jeep Wrangler Unlimited 4-Door (JK)
2008 Jeep Wrangler Unlimited 4-Door (JK)
2007 Jeep Wrangler Unlimited 4-Door (JK)
Proudly Made 100% In USA.
Learn More
Installation Notes
Installation Difficulty:
Level 4 Experts Only
Exhaust modifications required.
Installation Time: 8-10 hours
Parts Included
1 Passenger Side Double ThrowDown Arm
1 DTD EVOlever Subframe
2 King Coilover Shocks
2 King Bypass Shocks
1 Canti Track Bracket
1 Driver Side Heim Mount Bracket
1 EVOlever Frame Side Trackbar Relocation Bracket
2 Cantilever Arm End Link Tubes
2 3/4" Male RH Heim Joints
2 3/4" Male LH Heim Joints
2 3/4" Right Hand Hex Jam Nuts
2 3/4" Left Hand Hex Jam Nuts
8 3/4" Misalignment Spacers
8 Hose Clamps
8 Tabs
2 20" Limit Straps
2 Cross Braces in Clear Zinc
4 5/8" Misalignment Spacers
4 5/8" Male RH Heim Joints
4 5/8" Right Hand Hex Jam Nuts
4 Cantilever Bushings
Installation Hardware
Warranty
Specs
Fitment
Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
Description
The rear EVO MFG Double ThrowDown System is engineered for the Jeep owners who like to go fast. This system utilizes a coilover just like EVO MFG's EVOlever and has all the same added benefits, as well as an additional bypass shock each corner. With the addition of a bypass shock you have full external adjustability of the damping and "zones" within the shock stroke that allow the system to be position sensitive. This system gives you 14" of positions sensitive damping without the need for cutting holes in the body of your Jeep.
EVO MFG is now shipping the rear EVOlever and Double ThrowDown sub frames with the bushing and pivot points preassembled and lubricated .This simple process will help ease the install and insure proper set up of the pivot points. Now the installer will be able to install this product faster which means you can enjoy all these great benefits of the EVOlever sooner.
Proudly Made 100% In USA.
Allows the uses of long travel coilover and external bypass shocks in the rear of your JK without the need for doing any major cutting.
Absolutely no cutting of the body.
Offers up to 14Β of vertical wheel travel.
Optimizes Short Arm and Long Arm suspension system, from every manufacturer without modification. (Rancho Long Arm/Rock Krawler needs modification)
Offers the maximum amount of ground clearance with 14" travel. All key components fully protected and above axle at all times.
Adjustable ride height.
Four Ply limit strap included
3/4"chromoly heim joints.
Stainless steel misalignments.
Grade 8 hardware
Allows for use of 35Β up to 42Β tires (Larger than 37", Body Trimming required)
Level 4 Experts Only
Exhaust modifications required.
1 Driver Side Double ThrowDown Arm
1 Passenger Side Double ThrowDown Arm
1 DTD EVOlever Subframe
2 King Coilover Shocks
2 King Bypass Shocks
1 Canti Track Bracket
1 Driver Side Heim Mount Bracket
1 EVOlever Frame Side Trackbar Relocation Bracket
2 Cantilever Arm End Link Tubes
2 3/4" Male RH Heim Joints
2 3/4" Male LH Heim Joints
2 3/4" Right Hand Hex Jam Nuts
2 3/4" Left Hand Hex Jam Nuts
8 3/4" Misalignment Spacers
8 Hose Clamps
8 Tabs
2 20" Limit Straps
2 Cross Braces in Clear Zinc
4 5/8" Misalignment Spacers
4 5/8" Male RH Heim Joints
4 5/8" Right Hand Hex Jam Nuts
4 Cantilever Bushings
Installation Hardware
Limited Lifetime Warranty.
Features: Coil Over
Shocks Included: With Shocks
Max Tire Size: 42
Lift Height Range: 3 - 4.5 inch
Included Parts: Coil Springs, Control Arm Brackets, Extended Brake Lines, Extended Sway Bars, Hardware
Shipping Weight: 182lb
Shipping Dimensions: 81in x 37in x 22in (L x W x H)
2018 Jeep Wrangler 2-Door (JK)
2017 Jeep Wrangler 2-Door (JK)
2016 Jeep Wrangler 2-Door (JK)
2015 Jeep Wrangler 2-Door (JK)
2014 Jeep Wrangler 2-Door (JK)
2013 Jeep Wrangler 2-Door (JK)
2012 Jeep Wrangler 2-Door (JK)
2011 Jeep Wrangler 2-Door (JK)
2010 Jeep Wrangler 2-Door (JK)
2009 Jeep Wrangler 2-Door (JK)
2008 Jeep Wrangler 2-Door (JK)
2007 Jeep Wrangler 2-Door (JK)
2018 Jeep Wrangler Unlimited 4-Door (JK)
2017 Jeep Wrangler Unlimited 4-Door (JK)
2016 Jeep Wrangler Unlimited 4-Door (JK)
2015 Jeep Wrangler Unlimited 4-Door (JK)
2014 Jeep Wrangler Unlimited 4-Door (JK)
2013 Jeep Wrangler Unlimited 4-Door (JK)
2012 Jeep Wrangler Unlimited 4-Door (JK)
2011 Jeep Wrangler Unlimited 4-Door (JK)
2010 Jeep Wrangler Unlimited 4-Door (JK)
2009 Jeep Wrangler Unlimited 4-Door (JK)
2008 Jeep Wrangler Unlimited 4-Door (JK)
2007 Jeep Wrangler Unlimited 4-Door (JK)
Proudly Made 100% In USA.
Learn More
Installation Notes
Installation Difficulty:
Level 4 Experts Only
Exhaust modifications required.
Installation Time: 8-10 hours
Parts Included
1 Passenger Side Double ThrowDown Arm
1 DTD EVOlever Subframe
2 King Coilover Shocks
2 King Bypass Shocks
1 Canti Track Bracket
1 Driver Side Heim Mount Bracket
1 EVOlever Frame Side Trackbar Relocation Bracket
2 Cantilever Arm End Link Tubes
2 3/4" Male RH Heim Joints
2 3/4" Male LH Heim Joints
2 3/4" Right Hand Hex Jam Nuts
2 3/4" Left Hand Hex Jam Nuts
8 3/4" Misalignment Spacers
8 Hose Clamps
8 Tabs
2 20" Limit Straps
2 Cross Braces in Clear Zinc
4 5/8" Misalignment Spacers
4 5/8" Male RH Heim Joints
4 5/8" Right Hand Hex Jam Nuts
4 Cantilever Bushings
Installation Hardware
Warranty
Specs
Fitment
Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
Reviews
