VersaHitch Receiver, Wiring Kit, Jeep Logo Plug, Cargo Rack & D-Ring Accessory Hitch with 3/4" D-Ring for 07-18 Jeep Wrangler JK

Learn More

VersaHitch
This patented hitch design features a 2" Class II receiver at the center with two additional 1.5" accessory receiver tubes for superior stability over a single receiver design. The unique VersaHitch design allows you to pull a trailer while VersaHitch accessories are installed! The VersaHitch has a 350-lb tongue weight rating with a 3,500-lb tow rating for Wrangler Unlimited and a 2,000-lb rating for 2 Door Wranglers. The standard 2" receiver features a welded clip for our 4 pin plug-n-play hitch wiring kit. Thick welded steel construction features an anti-corrosion treatment that's powder coated for durability and good looks. Consult your owner's manual for maximum vehicle towing capacity and recommended towing procedures. Bolt-on installation takes only minutes to install with no drilling. Three-year limited warranty. Direct plug and play Hitch wiring kit included along with a Jeep® Logo Rubberized Hitch plug.
VersaHitch Cargo Rack
The VersaHitch Cargo Rack brings unprecedented rigidity and stability to a cargo rack with the use of two receiver arms instead of just one. Virtually eliminates the wobble that most conventional single receiver arm racks have. The clever design even allows the center 2" receiver tube to be used for towing while the Cargo Rack is installed. No other cargo rack can do that! The generous 20" x 48" cargo floor is rated for 300 lbs. Rack folds down to open tailgate and when empty, can be folded forward against a 32" or smaller tire for towing. The aluminum and steel construction provides an impressive strength to weight ratio and features a black powder coat finish for lasting good looks. A VersaHitch Extended Ball Mount Kit (sold separately) is required for towing while using a VersaHitch Cargo Rack. Three-year limited warranty.

VersaHitch D-Ring Mount
The VersaHitch D-Ring Mounts feature forged steel construction with black finish and choice of ¾" D-Ring color.
D Ring Mount features an 1 1/2" design and is only compatible with the VersaHitch line of receiver hitches.

Specs

For Factory Steel Bumper & Black:

For Factory Steel Bumper & Galvanized:

For Factory Steel Bumper & Red:

For Factory Steel Bumper & Yellow:

For Factory Plastic Bumper & Black:

For Factory Plastic Bumper & Galvanized:

For Factory Plastic Bumper & Red:

For Factory Plastic Bumper & Yellow:

Fitment

Jeep Wrangler 2-Door (JK)

2018 Jeep Wrangler 2-Door (JK)

2017 Jeep Wrangler 2-Door (JK)

2016 Jeep Wrangler 2-Door (JK)

2015 Jeep Wrangler 2-Door (JK)

2014 Jeep Wrangler 2-Door (JK)

2013 Jeep Wrangler 2-Door (JK)

2012 Jeep Wrangler 2-Door (JK)

2011 Jeep Wrangler 2-Door (JK)

2010 Jeep Wrangler 2-Door (JK)

2009 Jeep Wrangler 2-Door (JK)

2008 Jeep Wrangler 2-Door (JK)

2007 Jeep Wrangler 2-Door (JK)

Jeep Wrangler Unlimited 4-Door (JK)

2018 Jeep Wrangler Unlimited 4-Door (JK)

2017 Jeep Wrangler Unlimited 4-Door (JK)

2016 Jeep Wrangler Unlimited 4-Door (JK)

2015 Jeep Wrangler Unlimited 4-Door (JK)

2014 Jeep Wrangler Unlimited 4-Door (JK)

2013 Jeep Wrangler Unlimited 4-Door (JK)

2012 Jeep Wrangler Unlimited 4-Door (JK)

2011 Jeep Wrangler Unlimited 4-Door (JK)

2010 Jeep Wrangler Unlimited 4-Door (JK)

2009 Jeep Wrangler Unlimited 4-Door (JK)

2008 Jeep Wrangler Unlimited 4-Door (JK)

2007 Jeep Wrangler Unlimited 4-Door (JK)

Options