Clayton's XJ and ZJ adjustable track bar gives you all the strength and adjustability your lifted Jeep needs. A greaseable forged johnny joint is used at the frame end, and a dual durometer, maintenance free, high quality GIIRO Joint bushing is pressed into a machined housing on the axle end.
Many customers have complained that their stock, or previous track bar has loosened up and damaged or egged out the factory hole. This adjustable track bar for your XJ uses a much larger 9/16s Grade 8 bolt to allow you to drill out your factory location and easily upgrade to this HD bushing.
Put simply - this is the strongest, most adjustable track bar on the market. Clayton's XJ Adjustable track bar comes powder coated black with a 9/16 hardware and a new lower flange tab to fit into the OE location at the axle side.
This new drop bracket lowers the track bar height and puts Clayton's heavy duty track bar in double sheer. This means Clayton recommend Clayton's drop pitman arm and should be used with 6-8 inches of lift. The bracket bolts into the OEM location, and Clayton recommend adding a few small welds for added strength. The bracket is designed to accept a 2.5 inch forged johnny joint using a 9/16s grade 8 bolt. Inside bracket width is 2 5/8s.
NOTE: Drilling is Required to install this track bar.
Features:
- Product Features:
- 2.5" Forged Johhny Joint Adjuster
- 1 3/8" X 5/16" DOM Tubing
- Dual Durometer GIIRO Joint
- Bushing 9/16" Grade 8 Hardware W/ Flanged Tab
- 1/4" Lowered Height
- Double Sheer Trackbar Bracket
- LIfetime Warranty*
- MADE IN THE USA!
Includes:
- COR-4500512 - Center to Center Min = 31-1/8", Max = 32-3/16"
Fitment:
- ZJ - Grand Cherokee 93-98
- XJ - Cherokee 84-01
Clayton's XJ and ZJ adjustable track bar gives you all the strength and adjustability your lifted Jeep needs. A greaseable forged johnny joint is used at the frame end, and a dual durometer, maintenance free, high quality GIIRO Joint bushing is pressed into a machined housing on the axle end.
Many customers have complained that their stock, or previous track bar has loosened up and damaged or egged out the factory hole. This adjustable track bar for your XJ uses a much larger 9/16s Grade 8 bolt to allow you to drill out your factory location and easily upgrade to this HD bushing.
Put simply - this is the strongest, most adjustable track bar on the market. Clayton's XJ Adjustable track bar comes powder coated black with a 9/16 hardware and a new lower flange tab to fit into the OE location at the axle side.
This new drop bracket lowers the track bar height and puts Clayton's heavy duty track bar in double sheer. This means Clayton recommend Clayton's drop pitman arm and should be used with 6-8 inches of lift. The bracket bolts into the OEM location, and Clayton recommend adding a few small welds for added strength. The bracket is designed to accept a 2.5 inch forged johnny joint using a 9/16s grade 8 bolt. Inside bracket width is 2 5/8s.
NOTE: Drilling is Required to install this track bar.
Features:
- Product Features:
- 2.5" Forged Johhny Joint Adjuster
- 1 3/8" X 5/16" DOM Tubing
- Dual Durometer GIIRO Joint
- Bushing 9/16" Grade 8 Hardware W/ Flanged Tab
- 1/4" Lowered Height
- Double Sheer Trackbar Bracket
- LIfetime Warranty*
- MADE IN THE USA!
Includes:
- COR-4500512 - Center to Center Min = 31-1/8", Max = 32-3/16"
Fitment:
- ZJ - Grand Cherokee 93-98
- XJ - Cherokee 84-01
