The Steer Smarts YETI XD Draglink Assembly with Griffin Attenuator is the perfect compliment to your lifted Jeep Wrangler JL or Gladiator JT. Offering options to mount above or below the factory tapered steering knuckle. The Top mounted design is for 3.5" and higher lift kits allowing for proper steering geometry. While the bottom mount is for smaller lifts and stock applications. The top mount features a reverse taper mount system that offers a non-drill mount for a simple installation with incredible strength. Buy the best draglink available for your Jeep Wrangler JL or Gladiator JT while offering reducing the harsh negative feedback to your steering wheel. Made in USA.
For the top-mounted draglink a minimal 3.5" lift is required. Also, a track bar relocation bracket is required when flipping your draglink. The top mount draglink is not recommended for the 3.5" Metal Cloak lift.
Requires a minimal 17" wheel size with 4.5" or less backspacing for proper fitment.
Anniversary Edition Factory Skid plates require slight modification for proper clearance.Learn More
Precise Fitment:
- Left Hand Drive applications only
- Simple bolt on installation to original mounting points
Premium Ball Joint Features:
- Size - 30mm - 1 1/2 ton
- Alloy Steel Ball Studs - Induction heat treated to make it extremely strong with ultimate impact strength
- Steel on Steel Bearings - extremely durable ball joint wear resistance.
- Premium quality seals - provide long life and reliability.
- Greaseable design
Stout Draglink End Features:
- Reverse Pin Technology - prevents the linkage from flopping/rocking (built into the socket)
- Rolled Thread Size - 1 1/4"
- Forged Medium Carbon High Harden-ability Steel & Heat Treated
- E-coated and finished with a premium powdercoat
Ultimate Griffin XD Attenuator Features:
- Reduces harsh negative feedback to your steering wheel
- Draglink Adjuster Size - 1/4" thich wall 4130 Chromoly (large diameter)
- Fully adjustable once installed for easy adjustment
- E-coated and finished with a premium powdercoat
- High clearance design to eliminate potential interference
Parts Included
Draglink AssemblyWarranty
Specs
For Top Mount with Stock Knuckles Non Drilled & w/ Red Boot:
For Top Mount with Stock Knuckles Non Drilled & w/ Black Boot:
For Bottom Mount with Stock Setup & w/ Red Boot:
For Bottom Mount with Stock Setup & w/ Black Boot:
Fitment
Jeep Gladiator (JT)
Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
Not compatible with Mojave edition skidplate
Options
Steer Smarts YETI XD Draglink Assembly with Griffin Attenuator Options
| Part Number | Catalog # | Price | |||||||
|---|---|---|---|---|---|---|---|---|---|
| 78077002 | 16135-7033 | Top Mount with Stock Knuckles Non Drilled | w/ Red Boot | $699.99 | |||||
| 78077001 | 16135-7032 | Top Mount with Stock Knuckles Non Drilled | w/ Black Boot | $699.99 | |||||
| 78089002 | 16135-7035 | Bottom Mount with Stock Setup | w/ Red Boot | $699.99 | |||||
| 78089001 | 16135-7034 | Bottom Mount with Stock Setup | w/ Black Boot | $699.99 |
The Steer Smarts YETI XD Draglink Assembly with Griffin Attenuator is the perfect compliment to your lifted Jeep Wrangler JL or Gladiator JT. Offering options to mount above or below the factory tapered steering knuckle. The Top mounted design is for 3.5" and higher lift kits allowing for proper steering geometry. While the bottom mount is for smaller lifts and stock applications. The top mount features a reverse taper mount system that offers a non-drill mount for a simple installation with incredible strength. Buy the best draglink available for your Jeep Wrangler JL or Gladiator JT while offering reducing the harsh negative feedback to your steering wheel. Made in USA.
For the top-mounted draglink a minimal 3.5" lift is required. Also, a track bar relocation bracket is required when flipping your draglink. The top mount draglink is not recommended for the 3.5" Metal Cloak lift.
Requires a minimal 17" wheel size with 4.5" or less backspacing for proper fitment.
Anniversary Edition Factory Skid plates require slight modification for proper clearance.Learn More
Precise Fitment:
- Left Hand Drive applications only
- Simple bolt on installation to original mounting points
Premium Ball Joint Features:
- Size - 30mm - 1 1/2 ton
- Alloy Steel Ball Studs - Induction heat treated to make it extremely strong with ultimate impact strength
- Steel on Steel Bearings - extremely durable ball joint wear resistance.
- Premium quality seals - provide long life and reliability.
- Greaseable design
Stout Draglink End Features:
- Reverse Pin Technology - prevents the linkage from flopping/rocking (built into the socket)
- Rolled Thread Size - 1 1/4"
- Forged Medium Carbon High Harden-ability Steel & Heat Treated
- E-coated and finished with a premium powdercoat
Ultimate Griffin XD Attenuator Features:
- Reduces harsh negative feedback to your steering wheel
- Draglink Adjuster Size - 1/4" thich wall 4130 Chromoly (large diameter)
- Fully adjustable once installed for easy adjustment
- E-coated and finished with a premium powdercoat
- High clearance design to eliminate potential interference
Parts Included
Draglink AssemblyWarranty
Specs
For Top Mount with Stock Knuckles Non Drilled & w/ Red Boot:
For Top Mount with Stock Knuckles Non Drilled & w/ Black Boot:
For Bottom Mount with Stock Setup & w/ Red Boot:
For Bottom Mount with Stock Setup & w/ Black Boot:
Fitment
Jeep Gladiator (JT)
Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
Not compatible with Mojave edition skidplate
Options
Steer Smarts YETI XD Draglink Assembly with Griffin Attenuator Options
| Part Number | Catalog # | Price | |||||||
|---|---|---|---|---|---|---|---|---|---|
| 78077002 | 16135-7033 | Top Mount with Stock Knuckles Non Drilled | w/ Red Boot | $699.99 | |||||
| 78077001 | 16135-7032 | Top Mount with Stock Knuckles Non Drilled | w/ Black Boot | $699.99 | |||||
| 78089002 | 16135-7035 | Bottom Mount with Stock Setup | w/ Red Boot | $699.99 | |||||
| 78089001 | 16135-7034 | Bottom Mount with Stock Setup | w/ Black Boot | $699.99 |
