The Steer Smarts YETI Series Extreme Duty Draglinks for JK are equivalent to a class 4 truck and may be the strongest most durable linkage ever built for JK. Draglinks are available in 3 applications and bolt to the factory tapered holes at the knuckle and pitman arm with no modifications required. Fully assembled; pre adjusted and ready to install. The epoxy powder coating and e-coated threads provide lasting good looks. The grease-able 30mm ball joints are the largest and strongest ever assembled in a Wrangler steering linkage. The reverse pin ball joint technology prevents the linkage from flopping or rocking for significant improvement in ball joint durability. All drag link rod ends are forged and heat treated for strength. The large 1 ¼" diameter tie rod adjuster and draglink ends provide a significant increase in strength over the original equipment.
The draglink adjuster is made from ¼" thick high strength steel tubing with right and left hand threads to allow for easy alignment. Made in USA.
Note: A minimum of 17" wheels is recommended. 16" wheels with a maximum 4.5 back spacing might fit but not guaranteed.
Learn More
Installation Notes
Installation Difficulty:
Level 2 Intermediate
A minimum of 17" wheels is recommended. 16" wheels with a maximum 4.5 back spacing might fit but not guaranteed.
Steer Smarts YETI Series Extreme Duty Draglink Assembly Options
Part Number
Catalog #
Price
78063001
16135-7010
Top Mount with Stock Knuckes Non Drilled
$449.99
78066001
16135-7011
Top Mount with Stock Knuckes Drilled
$449.99
78064001
16135-7012
Bottom Mount with Stock Setup
$449.99
Description
The Steer Smarts YETI Series Extreme Duty Draglinks for JK are equivalent to a class 4 truck and may be the strongest most durable linkage ever built for JK. Draglinks are available in 3 applications and bolt to the factory tapered holes at the knuckle and pitman arm with no modifications required. Fully assembled; pre adjusted and ready to install. The epoxy powder coating and e-coated threads provide lasting good looks. The grease-able 30mm ball joints are the largest and strongest ever assembled in a Wrangler steering linkage. The reverse pin ball joint technology prevents the linkage from flopping or rocking for significant improvement in ball joint durability. All drag link rod ends are forged and heat treated for strength. The large 1 ¼" diameter tie rod adjuster and draglink ends provide a significant increase in strength over the original equipment.
The draglink adjuster is made from ¼" thick high strength steel tubing with right and left hand threads to allow for easy alignment. Made in USA.
Note: A minimum of 17" wheels is recommended. 16" wheels with a maximum 4.5 back spacing might fit but not guaranteed.
Learn More
Installation Notes
Installation Difficulty:
Level 2 Intermediate
A minimum of 17" wheels is recommended. 16" wheels with a maximum 4.5 back spacing might fit but not guaranteed.
