Upgrade the stereo in your Jeep Wrangler YJ or TJ with the Quadratec Custom Rear Subwoofer Kit with 10" Kicker CompS Subwoofer. This custom-made Wrangler specific kit directly bolts into place behind the rear seat using existing cargo loop bolts. No cutting, drilling, or other modifications are required for installation. A remote bass controller is also included with this kit for for easy level adjustment. The JWSUBK10 is assembled right here in the USA, and carries a 1 year warranty.
Required Wiring Sold SeparatelyLearn More
Easy Install: No drilling or modifications are required. The subwoofer box mounts to the factory footman loop bolts on the floor behind the rear seat.
Jeep Specific Design: This kit is tuned specifically for use with Jeep Wrangler YJs and TJs.
Kicker Comp10 Subwoofer Specs:
Speaker Diameter: 10"
Top Mount Depth: 5-1/6"
Peak Wattage: 300 watts
Root Mean Square (RMS) Wattage: 150 watts
Impedance: 4 ohms
Sensitivity: 86.2dB
CX400.1 Mono Amplifier Specs:
Power (watts/ch) 4 Ohm: 150x1
Power (watts/ch) 2 Ohm: 300x1
Power (watts/ch) 1 Ohm: 400x1
CXRC Remote Bass Capable (sold sep.): yes
Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L): 8-1/8, 20.6
Frequency Response (Hz): 25-200, +0/-1dB
Input Sensitivity: 125mV-5V (Low Level), 1V-40V (High Level)
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: Variable Lo-pass 50Hz-200Hz, 12dB/octave
Subsonic Filter: 25Hz @24dB/octave
KickEQ™ Boost: Variable 0-6dB @40Hz
Specs
Fitment
Jeep Wrangler (TJ)
Jeep Wrangler (YJ)
Upgrade the stereo in your Jeep Wrangler YJ or TJ with the Quadratec Custom Rear Subwoofer Kit with 10" Kicker CompS Subwoofer. This custom-made Wrangler specific kit directly bolts into place behind the rear seat using existing cargo loop bolts. No cutting, drilling, or other modifications are required for installation. A remote bass controller is also included with this kit for for easy level adjustment. The JWSUBK10 is assembled right here in the USA, and carries a 1 year warranty.
Required Wiring Sold SeparatelyLearn More
Easy Install: No drilling or modifications are required. The subwoofer box mounts to the factory footman loop bolts on the floor behind the rear seat.
Jeep Specific Design: This kit is tuned specifically for use with Jeep Wrangler YJs and TJs.
Kicker Comp10 Subwoofer Specs:
Speaker Diameter: 10"
Top Mount Depth: 5-1/6"
Peak Wattage: 300 watts
Root Mean Square (RMS) Wattage: 150 watts
Impedance: 4 ohms
Sensitivity: 86.2dB
CX400.1 Mono Amplifier Specs:
Power (watts/ch) 4 Ohm: 150x1
Power (watts/ch) 2 Ohm: 300x1
Power (watts/ch) 1 Ohm: 400x1
CXRC Remote Bass Capable (sold sep.): yes
Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L): 8-1/8, 20.6
Frequency Response (Hz): 25-200, +0/-1dB
Input Sensitivity: 125mV-5V (Low Level), 1V-40V (High Level)
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: Variable Lo-pass 50Hz-200Hz, 12dB/octave
Subsonic Filter: 25Hz @24dB/octave
KickEQ™ Boost: Variable 0-6dB @40Hz
