Painless GM Gen III LS Swap Wiring Harness makes your Jeep engine swap a simple task! This standard length harness allows four feet from the back of the intake manifold to where the fuseblock and ECM mount, perfect for those that plan to mount these components under the dash or in the glove box. This harness supports both flex and non flex fuel engines, (Flex fuel engines will require an inline fuel composition sensor in order to run E85). Included is a 10 circuit weatherproof fuse block & mounting bracket with GM color coded wires and labels for easy installation. Requires manual transmission or 4L60E, 4L65E, 4L80E, or 4L85E automatic transmission.
Please Note : This harness is standalone and is not intended to replace the OEM engine wiring.
Made in the USA.
Harness Length: 4 Feet Between Engine and ECM
Fuse Type: Mini Blade
This harness includes connections for the following components:A/C Request
Accelerator Pedal Position Sensor
Alternator
Brake Switch
Cam Position Sensor
Cooling Fans
Crank Position Sensor
Cruise Control
Data Link Connector
Driver/Pass Front O2 Sensors
ECM
Engine Coolant Temperature
Fuel Compensation Sensor
Fuel Pump
Fuel Pump Test
Grounds
Ignition Coils
Ignition Switch Signal
Injectors - Gas & Flex Fuel Sub-Harness
Input Speed Sensor
Knock Sensors
Malfunction Indicator Lamp
MAP Sensor
Mass Airflow / Intake Air Temperature Sensor
Output Speed Sensor
Park/Neutral Switch
Reverse Lights
Starter
Starter Relay Activation
Tachometer
Throttle Actuator Control Module
Throttle Actuator Control Module to Accelerator Pedal Pigtail
Throttle Body
Transmission
VSS Output for Speedometer
Knock Sensor Pigtail
Level 3 Advanced
EFI Harness with OEM Connectors
OBDII Connector
Mounting Bracket and Check Engine Light
Rubber Firewall Grommet Mounting Hardware
Limited Lifetime
Engine Size: GM Generation III V-8
Engine Fuel: Gasoline
Shipping Weight: 10lb
Shipping Dimensions: 15in x 11in x 5in (L x W x H)
Engine Size: GM Generation III V-8
Engine Fuel: Gasoline
Shipping Weight: 9lb
Shipping Dimensions: 15in x 11in x 6in (L x W x H)
Please Note : This harness is standalone and is not intended to replace the OEM engine wiring.
Made in the USA.
Learn More
Number of Circuits: 10 Fuses with 2 Ignition, 1 Cooling Fan & 1 Fuel Pump RelayHarness Length: 4 Feet Between Engine and ECM
Fuse Type: Mini Blade
This harness includes connections for the following components:
Installation Notes
Installation Difficulty:
Level 3 Advanced
Installation Time: 8-10 hours
Mechanical Throttle (60217)
Wired Throttle (60221)
Parts Included
OBDII Connector
Mounting Bracket and Check Engine Light
Rubber Firewall Grommet Mounting Hardware
Warranty
Specs
For with Electric Wired Throttle:
For with Mechanical Throttle:
Options
Painless Wiring GM Gen III LS Wiring Harness Options
| Part Number | Catalog # | Throttle Type | Price | ||||||
|---|---|---|---|---|---|---|---|---|---|
| 60221 | 17004-0131 | with Electric Wired Throttle | $715.99 | ||||||
| 60217 | 17004-0130 | with Mechanical Throttle | $579.99 |
Description
Painless GM Gen III LS Swap Wiring Harness makes your Jeep engine swap a simple task! This standard length harness allows four feet from the back of the intake manifold to where the fuseblock and ECM mount, perfect for those that plan to mount these components under the dash or in the glove box. This harness supports both flex and non flex fuel engines, (Flex fuel engines will require an inline fuel composition sensor in order to run E85). Included is a 10 circuit weatherproof fuse block & mounting bracket with GM color coded wires and labels for easy installation. Requires manual transmission or 4L60E, 4L65E, 4L80E, or 4L85E automatic transmission.
Please Note : This harness is standalone and is not intended to replace the OEM engine wiring.
Made in the USA.
Harness Length: 4 Feet Between Engine and ECM
Fuse Type: Mini Blade
This harness includes connections for the following components:A/C Request
Accelerator Pedal Position Sensor
Alternator
Brake Switch
Cam Position Sensor
Cooling Fans
Crank Position Sensor
Cruise Control
Data Link Connector
Driver/Pass Front O2 Sensors
ECM
Engine Coolant Temperature
Fuel Compensation Sensor
Fuel Pump
Fuel Pump Test
Grounds
Ignition Coils
Ignition Switch Signal
Injectors - Gas & Flex Fuel Sub-Harness
Input Speed Sensor
Knock Sensors
Malfunction Indicator Lamp
MAP Sensor
Mass Airflow / Intake Air Temperature Sensor
Output Speed Sensor
Park/Neutral Switch
Reverse Lights
Starter
Starter Relay Activation
Tachometer
Throttle Actuator Control Module
Throttle Actuator Control Module to Accelerator Pedal Pigtail
Throttle Body
Transmission
VSS Output for Speedometer
Knock Sensor Pigtail
Level 3 Advanced
EFI Harness with OEM Connectors
OBDII Connector
Mounting Bracket and Check Engine Light
Rubber Firewall Grommet Mounting Hardware
Limited Lifetime
Engine Size: GM Generation III V-8
Engine Fuel: Gasoline
Shipping Weight: 10lb
Shipping Dimensions: 15in x 11in x 5in (L x W x H)
Engine Size: GM Generation III V-8
Engine Fuel: Gasoline
Shipping Weight: 9lb
Shipping Dimensions: 15in x 11in x 6in (L x W x H)
Please Note : This harness is standalone and is not intended to replace the OEM engine wiring.
Made in the USA.
Learn More
Number of Circuits: 10 Fuses with 2 Ignition, 1 Cooling Fan & 1 Fuel Pump RelayHarness Length: 4 Feet Between Engine and ECM
Fuse Type: Mini Blade
This harness includes connections for the following components:
Installation Notes
Installation Difficulty:
Level 3 Advanced
Installation Time: 8-10 hours
Mechanical Throttle (60217)
Wired Throttle (60221)
Parts Included
OBDII Connector
Mounting Bracket and Check Engine Light
Rubber Firewall Grommet Mounting Hardware
Warranty
Specs
For with Electric Wired Throttle:
For with Mechanical Throttle:
Options
Painless Wiring GM Gen III LS Wiring Harness Options
| Part Number | Catalog # | Throttle Type | Price | ||||||
|---|---|---|---|---|---|---|---|---|---|
| 60221 | 17004-0131 | with Electric Wired Throttle | $715.99 | ||||||
| 60217 | 17004-0130 | with Mechanical Throttle | $579.99 |
Reviews
