ICON 2022-2023 Toyota Tundra 6" Suspension System with Tubular Upper Control Arms

ICON is proud to introduce a range of 6-inch Performance Suspension System "Stage" kits for 2022 and newer Toyota Tundra. All feature ICON's high clearance 4-inch drop front crossmember kit including a differential skid plate and ductile iron steering knuckles. The crossmember and knuckles drop the front differential 4 inches to preserve CV-joint operating angles, achieving maximum travel while being safe on components and providing great handling characteristics both on- and off-road.

ICON have pre-configured nine Stages of suspension systems to meet just about any level of performance expectations and budget. Spacer-based Stage 1 retains the stock front coilovers and rear springs to economically fit up to 37" tires. At the other end of the spectrum ICON's fully loaded Stage 9 features a full complement of tubular control arms along with ICON 2.5 VS Coilovers and Shocks featuring cutting-edge CDEV electronic performance technology. Every Stage of ICON's 6-Inch Tundra Systems includes all of the necessary drop brackets, spacers or mounts needed to allow bind-free movement of both the front and rear suspension to coax maximum performance out of every component in the kit.

Box Kits Include (Applies to all stages):

IVD-51010 22-23 TUNDRA FRONT BOX KIT 1

• Front Crossmember
• Rear Crossmember

IVD-51011 22-23 TUNDRA FRONT BOX KIT 2

• Sway Bar Drop
• Brake Line Brackets
• Outer Tie Rods
• Bump Extensions

IVD-51012 22-23 TUNDRA REAR BOX KIT

• Brake Line Brackets
• Track Bar Bracket
• Sway Bar Link Mounts
• Foam Axle Pads

IVD-K53271T - Stage 1

Features:

• Optimized design to fit 37" tires with full articulation (larger tires may fit but fender trimming and modifications will be required)
• Maintains factory track width
• Front coilover spacer kit with heavy duty steel construction
• Provides 6" front suspension lift with only 4" of crossmember drop
• Single piece high-strength ductile iron steering knuckles
• Hight clearance front crossmembers and front skid plate, CNC Laser Cut and brake-formed from 1/4-inch steel plate
• Included sway bar drop brackets reduce bind in OE sway bar links
• Front and rear heavy-duty bump stop brackets
• High angle outer tie-roads feature durable, metal on metal greaseable tie rod ends
• 2.0 Aluminum Series rear shocks to improve rear suspension performance
• Rear coil spring spacer kit to provide lift while retaining factory rear coil springs
• Improved rear sway bar links and mounts, and rear track bar bracket to reduce bind in the rear suspension

Includes:

• IVD-51010 22-23 TUNDRA FRONT BOX KIT 1
• IVD-51011 22-23 TUNDRA FRONT BOX KIT 2
• IVD-51012 22-23 TUNDRA REAR BOX KIT
• IVD-51014 22-23 TUNDRA FRONT KNUCKLE KIT
• IVD-51015 22-23 TUNDRA / 23 SEQUOIA 6" COILOVER SPACER KIT
• IVD-51016 22-23 TUNDRA REAR COIL SPACER KIT
• IVD-51017 22-23 TUNDRA FRONT SKID PLATE
• IVD-56517 22-23 TUNDRA 6" REAR 2.0 VS IR (2)

IVD-K53272T Stage 2

Features:

• 2.5 Series front coilovers with remote reservoirs for superior damping and vehicle control
• System allows for up to 40% increase in front wheel travel over stock without overstressing OE components
• Optimized design to fit 37" tires with full articulation (larger tires may fit but fender trimming and modifications will be required)
• Maintains factory track width
• Optimized suspension geometry nearly eliminates the bump steer found in stock Tundras
• Adjustable front ride heights from 5-6" of front lift over stock (up to 6" of lift with only 4" of crossmember drop)
• Tubular aluminum UCAs with Delta Joint Pro for added strength, durability, and caster correction
• Patented Delta Joint Pro (U.S. Pat. 10,731,700) provides improved durability and serviceability with 90 degrees of total articulation
• Single piece high-strength ductile iron steering knuckles
• Hight clearance front crossmembers and front skid plate, CNC Laser Cut and brake-formed from 1/4-inch steel plate
• Included sway bar drop brackets reduce bind in OE sway bar links
• Front and rear heavy-duty bump stop brackets
• High angle outer tie-roads feature durable, metal on metal greaseable tie rod ends
• 2.0 Aluminum Series rear shocks provide balanced tune with the front coilovers
• Rear coil spring spacer kit to provide lift while retaining factory rear coil springs
• Improved rear sway bar links and mounts, and rear track bar bracket to reduce bind in the rear suspension

Includes:

• IVD-51010 22-23 TUNDRA FRONT BOX KIT 1
• IVD-51011 22-23 TUNDRA FRONT BOX KIT 2
• IVD-51012 22-23 TUNDRA REAR BOX KIT
• IVD-51014 22-23 TUNDRA FRONT KNUCKLE KIT
• IVD-58672 22-23 TUNDRA 2.5 VS IR 6" COILOVER KIT
• IVD-51016 22-23 TUNDRA REAR COIL SPACER KIT
• IVD-51017 22-23 TUNDRA FRONT SKID PLATE
• IVD-58461DJ 22-23 TUNDRA/23 SEQUOIA TUBULAR UCA DJ PRO KIT
• IVD-56517 22-23 TUNDRA 6" REAR 2.0 VS IR (2)

IVD-K53273T - Stage 3

Features:

• 2.5 Series front coilovers with remote reservoirs for superior damping and vehicle control along with improved shock cooling
• System allows for up to 40% increase in front wheel travel over stock without overstressing OE components
• Optimized design to fit 37" tires with full articulation (larger tires may fit but fender trimming and modifications will be required)
• Maintains factory track width
• Optimized suspension geometry nearly eliminates the bump steer found in stock Tundras
• Adjustable front ride heights from 5-6" of front lift over stock (up to 6" of lift with only 4" of crossmember drop)
• Tubular aluminum UCAs with Delta Joint Pro for added strength, durability, and caster correction
• Patented Delta Joint Pro (U.S. Pat. 10,731,700) provides improved durability and serviceability with 90 degrees of total articulation
• Single piece high-strength ductile iron steering knuckles
• Hight clearance front crossmembers and front skid plate, CNC Laser Cut and brake-formed from 1/4-inch steel plate
• Included sway bar drop brackets reduce bind in OE sway bar links
• Front and rear heavy-duty bump stop brackets
• High angle outer tie-roads feature durable, metal on metal greaseable tie rod ends
• 2.0 Aluminum Series rear shocks with remote reservoirs provide balanced tune with the front coilovers and increased fluid volume for better heat dissipation
• ICON engineered custom triple rate rear coil springs provide progressive spring rates for a comfortable ride on-road as well as stability and control during aggressive off-road driving
• Improved rear sway bar links and mounts, and rear track bar bracket to reduce bind in the rear suspension

Includes:

• IVD-51010 22-23 TUNDRA FRONT BOX KIT 1
• IVD-51011 22-23 TUNDRA FRONT BOX KIT 2
• IVD-51012 22-23 TUNDRA REAR BOX KIT
• IVD-51014 22-23 TUNDRA FRONT KNUCKLE KIT
• IVD-58771 22-23 TUNDRA 2.5 VS RR 6" COILOVER KIT
• IVD-51016 22-23 TUNDRA REAR COIL SPACER KIT
• IVD-58461DJ 22-23 TUNDRA/23 SEQUOIA TUBULAR UCA DJ PRO KIT
• IVD-51017 22-23 TUNDRA FRONT SKID PLATE
• IVD-56517R 22-23 TUNDRA 6" REAR 2.0 VS RR (2)

IVD-K53274T - Stage 4

Features:

• 2.5 Series front coilovers and rear shocks with remote reservoirs for superior damping and vehicle control along with improved shock cooling
• System allows for up to 40% increase in front wheel travel over stock without overstressing OE components
• Optimized design to fit 37" tires with full articulation (larger tires may fit but fender trimming and modifications will be required)
• Maintains factory track width
• Optimized suspension geometry nearly eliminates the bump steer found in stock Tundras
• Adjustable front ride heights from 5-6" of front lift over stock (up to 6" of lift with only 4" of crossmember drop)
• Tubular aluminum UCAs with Delta Joint Pro for added strength, durability, and caster correction
• Patented Delta Joint Pro (U.S. Pat. 10,731,700) provides improved durability and serviceability with 90 degrees of total articulation
• Single piece high-strength ductile iron steering knuckles
• Hight clearance front crossmembers and front skid plate, CNC Laser Cut and brake-formed from 1/4-inch steel plate
• Included sway bar drop brackets reduce bind in OE sway bar links
• Front and rear heavy-duty bump stop brackets
• High angle outer tie-roads feature durable, metal on metal greaseable tie rod ends
• ICON engineered custom triple rate rear coil springs provide progressive spring rates for a comfortable ride on-road as well as stability and control during aggressive off-road driving
• Improved rear sway bar links and mounts, and rear track bar bracket to reduce bind in the rear suspension

Includes:

• IVD-51010 22-23 TUNDRA FRONT BOX KIT 1
• IVD-51011 22-23 TUNDRA FRONT BOX KIT 2
• IVD-51012 22-23 TUNDRA REAR BOX KIT
• IVD-51014 22-23 TUNDRA FRONT KNUCKLE KIT
• IVD-58771 22-23 TUNDRA 2.5 VS RR 6" COILOVER KIT
• IVD-51013 22-23 TUNDRA REAR 3.5 COIL SPRING KIT
• IVD-58461DJ 22-23 TUNDRA/23 SEQUOIA TUBULAR UCA DJ PRO KIT
• IVD-51017 22-23 TUNDRA FRONT SKID PLATE
• IVD-57841P 22-23 TUNDRA 6" REAR 2.5 VS RR PAIR

IVD-K53275T - Stage 5

Features:

• 2.5 Series front coilovers and rear shocks with remote reservoirs for superior damping and vehicle control along with improved shock cooling
• System allows for up to 40% increase in front wheel travel over stock without overstressing OE components
• Optimized design to fit 37" tires with full articulation (larger tires may fit but fender trimming and modifications will be required)
• Maintains factory track width
• Optimized suspension geometry nearly eliminates the bump steer found in stock Tundras
• Adjustable front ride heights from 5-6" of front lift over stock (up to 6" of lift with only 4" of crossmember drop)
• Tubular aluminum UCAs with Delta Joint Pro for added strength, durability, and caster correction
• Patented Delta Joint Pro (U.S. Pat. 10,731,700) provides improved durability and serviceability with 90 degrees of total articulation
• Single piece high-strength ductile iron steering knuckles
• Hight clearance front crossmembers and front skid plate, CNC Laser Cut and brake-formed from 1/4-inch steel plate
• Included sway bar drop brackets reduce bind in OE sway bar links
• Front and rear heavy-duty bump stop brackets
• High angle outer tie-roads feature durable, metal on metal greaseable tie rod ends
• ICON engineered custom triple rate rear coil springs provide progressive spring rates for a comfortable ride on-road as well as stability and control during aggressive off-road driving
• High clearance tubular rear lower links feature FK Rod Ends to improve rear end articulation and allow on-vehicle adjustment for different ride heights and pinion angles using ICON's double adjuster system
• Improved rear sway bar links and mounts, and rear track bar bracket to reduce bind in the rear suspension

Includes:

• IVD-51010 22-23 TUNDRA FRONT BOX KIT 1
• IVD-51011 22-23 TUNDRA FRONT BOX KIT 2
• IVD-51012 22-23 TUNDRA REAR BOX KIT
• IVD-51014 22-23 TUNDRA FRONT KNUCKLE KIT
• IVD-58771 22-23 TUNDRA 2.5 VS RR 6" COILOVER KIT
• IVD-51013 22-23 TUNDRA REAR 3.5 COIL SPRING KIT
• IVD-58461DJ 22-23 TUNDRA/23 SEQUOIA TUBULAR UCA DJ PRO KIT
• IVD-54002T 22-23 TUNDRA/23 SEQUOIA TUBULAR REAR LOWER LINK KIT
• IVD-51017 22-23 TUNDRA FRONT SKID PLATE
• IVD-57841P 22-23 TUNDRA 6" REAR 2.5 VS RR PAIR

IVD-K53276T - Stage 6

Features:

• 2.5 Series front coilovers and rear shocks with remote reservoirs for superior damping and vehicle control along with improved shock cooling
• System allows for up to 40% increase in front wheel travel over stock without overstressing OE components
• Optimized design to fit 37" tires with full articulation (larger tires may fit but fender trimming and modifications will be required)
• Maintains factory track width
• Optimized suspension geometry nearly eliminates the bump steer found in stock Tundras
• Adjustable front ride heights from 5-6" of front lift over stock (up to 6" of lift with only 4" of crossmember drop)
• Tubular aluminum UCAs with Delta Joint Pro for added strength, durability, and caster correction
• Patented Delta Joint Pro (U.S. Pat. 10,731,700) provides improved durability and serviceability with 90 degrees of total articulation
• Single piece high-strength ductile iron steering knuckles
• Hight clearance front crossmembers and front skid plate, CNC Laser Cut and brake-formed from 1/4-inch steel plate
• Included sway bar drop brackets reduce bind in OE sway bar links
• Front and rear heavy-duty bump stop brackets
• High angle outer tie-roads feature durable, metal on metal greaseable tie rod ends
• ICON engineered custom triple rate rear coil springs provide progressive spring rates for a comfortable ride on-road as well as stability and control during aggressive off-road driving
• Improved rear sway bar links and mounts, and rear track bar bracket to reduce bind in the rear suspension

Includes:

• IVD-51010 22-23 TUNDRA FRONT BOX KIT 1
• IVD-51011 22-23 TUNDRA FRONT BOX KIT 2
• IVD-51012 22-23 TUNDRA REAR BOX KIT
• IVD-51014 22-23 TUNDRA FRONT KNUCKLE KIT
• IVD-58771C 22-23 TUNDRA 2.5 VS RR CDCV 6" COILOVER KIT
• IVD-51013 22-23 TUNDRA REAR 3.5 COIL SPRING KIT
• IVD-58461DJ 22-23 TUNDRA/23 SEQUOIA TUBULAR UCA DJ PRO KIT
• IVD-51017 22-23 TUNDRA FRONT SKID PLATE
• IVD-57841CP 22-23 TUNDRA 6" REAR 2.5 VS CDCV RR PAIR

IVD-K53277T - Stage 7

Features:

• ICON's Compression Damping Electronic Valves (CDCV) provide easy manual adjustment of compression damping for each shock with 10 settings from soft to firm
• System allows for up to 40% increase in front wheel travel over stock without overstressing OE components
• Optimized design to fit 37" tires with full articulation (larger tires may fit but fender trimming and modifications will be required)
• Maintains factory track width
• Optimized suspension geometry nearly eliminates the bump steer found in stock Tundras
• 2.5 Series front coilovers and rear shocks with remote reservoirs for superior damping and vehicle control along with improved shock cooling
• Adjustable front ride heights from 5-6" of front lift over stock (up to 6" of lift with only 4" of crossmember drop)
• Tubular aluminum UCAs with Delta Joint Pro for added strength, durability, and caster correction
• Patented Delta Joint Pro (U.S. Pat. 10,731,700) provides improved durability and serviceability with 90 degrees of total articulation
• Single piece high-strength ductile iron steering knuckles
• Hight clearance front crossmembers and front skid plate, CNC Laser Cut and brake-formed from 1/4-inch steel plate
• Included sway bar drop brackets reduce bind in OE sway bar links
• Front and rear heavy-duty bump stop brackets
• High angle outer tie-roads feature durable, metal on metal greaseable tie rod ends
• ICON engineered custom triple rate rear coil springs provide progressive spring rates for a comfortable ride on-road as well as stability and control during aggressive off-road driving
• Tubular rear upper and high clearance lower links feature FK Rod Ends to improve rear end articulation and allow on-vehicle adjustment for different ride heights and pinion angles using ICON's double adjuster system
• On-vehicle adjustable billet rear track bar properly centers rear axle while also improve rear suspension performance
• Improved rear sway bar links and mounts, and rear track bar bracket to reduce bind in the rear suspension

Includes:

• IVD-51010 22-23 TUNDRA FRONT BOX KIT 1
• IVD-51011 22-23 TUNDRA FRONT BOX KIT 2
• IVD-51012 22-23 TUNDRA REAR BOX KIT
• IVD-51014 22-23 TUNDRA FRONT KNUCKLE KIT
• IVD-58771C 22-23 TUNDRA 2.5 VS RR CDCV 6" COILOVER KIT
• IVD-51013 22-23 TUNDRA REAR 3.5 COIL SPRING KIT
• IVD-58461DJ 22-23 TUNDRA/23 SEQUOIA TUBULAR UCA DJ PRO KIT
• IVD-51017 22-23 TUNDRA FRONT SKID PLATE
• IVD-57841CP 22-23 TUNDRA 6" REAR 2.5 VS CDCV RR PAIR
• IVD-54002T 22-23 TUNDRA/23 SEQUOIA TUBULAR REAR LOWER LINK KIT
• IVD-54102T 22-23 TUNDRA/23 SEQUOIA TUBULAR REAR UPPER LINK KIT
• IVD-54202 22-23 TUNDRA/23 SEQUOIA BILLET REAR ADJ TRACK BAR KIT

IVD-K53278T - Stage 8

Features:

• ICON's Compression Damping Electronic Valve (CDEV) technology allows for in vehicle adjustment of compression damping settings and active adjustment via IIC
• ICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis along with user defined settings to actively make on-the-fly, near instantaneous compression damping adjustments on CDEV-equipped shocks
• System allows for up to 40% increase in front wheel travel over stock without overstressing OE components
• Optimized design to fit 37" tires with full articulation (larger tires may fit but fender trimming and modifications will be required)
• Maintains factory track width
• Optimized suspension geometry nearly eliminates the bump steer found in stock Tundras
• 2.5 Series front coilovers and rear shocks with remote reservoirs for superior damping and vehicle control along with improved shock cooling
• Adjustable front ride heights from 5-6" of front lift over stock (up to 6" of lift with only 4" of crossmember drop)
• Tubular aluminum UCAs with Delta Joint Pro for added strength, durability, and caster correction
• Patented Delta Joint Pro (U.S. Pat. 10,731,700) provides improved durability and serviceability with 90 degrees of total articulation
• Single piece high-strength ductile iron steering knuckles
• Hight clearance front crossmembers and front skid plate, CNC Laser Cut and brake-formed from 1/4-inch steel plate
• Included sway bar drop brackets reduce bind in OE sway bar links
• Front and rear heavy-duty bump stop brackets
• High angle outer tie-roads feature durable, metal on metal greaseable tie rod ends
• ICON engineered custom triple rate rear coil springs provide progressive spring rates for a comfortable ride on-road as well as stability and control during aggressive off-road driving
• Improved rear sway bar links and mounts, and rear track bar bracket to reduce bind in the rear suspension

IVD-K53279T - Stage 9

Features:

• ICON's Compression Damping Electronic Valve (CDEV) technology allows for in vehicle adjustment of compression damping settings and active adjustment via IIC
• ICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis along with user defined settings to actively make on-the-fly, near instantaneous compression damping adjustments on CDEV-equipped shocks
• System allows for up to 40% increase in front wheel travel over stock without overstressing OE components
• Optimized design to fit 37" tires with full articulation (larger tires may fit but fender trimming and modifications will be required)
• Maintains factory track width
• Optimized suspension geometry nearly eliminates the bump steer found in stock Tundras
• 2.5 Series front coilovers and rear shocks with remote reservoirs for superior damping and vehicle control along with improved shock cooling
• Adjustable front ride heights from 5-6" of front lift over stock (up to 6" of lift with only 4" of crossmember drop)
• Tubular aluminum UCAs with Delta Joint Pro for added strength, durability, and caster correction
• Patented Delta Joint Pro (U.S. Pat. 10,731,700) provides improved durability and serviceability with 90 degrees of total articulation
• Single piece high-strength ductile iron steering knuckles
• Hight clearance front crossmembers and front skid plate, CNC Laser Cut and brake-formed from 1/4-inch steel plate
• Included sway bar drop brackets reduce bind in OE sway bar links
• Front and rear heavy-duty bump stop brackets
• High angle outer tie-roads feature durable, metal on metal greaseable tie rod ends
• ICON engineered custom triple rate rear coil springs provide progressive spring rates for a comfortable ride on-road as well as stability and control during aggressive off-road driving
• Tubular rear upper and high clearance lower links feature FK Rod Ends to improve rear end articulation and allow on-vehicle adjustment for different ride heights and pinion angles using ICON's double adjuster system
• On-vehicle adjustable billet rear track bar properly centers rear axle while also improve rear suspension performance
• Improved rear sway bar links and mounts, and rear track bar bracket to reduce bind in the rear suspension

Includes:

• IVD-51010 22-23 TUNDRA FRONT BOX KIT 1
• IVD-51011 22-23 TUNDRA FRONT BOX KIT 2
• IVD-51012 22-23 TUNDRA REAR BOX KIT
• IVD-51014 22-23 TUNDRA FRONT KNUCKLE KIT
• IVD-58771E 22-23 TUNDRA 2.5 VS RR CDEV 6" COILOVER KIT
• IVD-51013 22-23 TUNDRA REAR 3.5 COIL SPRING KIT
• IVD-58461DJ 22-23 TUNDRA/23 SEQUOIA TUBULAR UCA DJ PRO KIT
• IVD-51017 22-23 TUNDRA FRONT SKID PLATE
• IVD-57841EP 22-23 TUNDRA 6" REAR 2.5 VS CDEV RR PAIR
• IVD-53508 22-23 TUNDRA/23 SEQUOIA IIC INSTALL KIT
• IVD-54002T 22-23 TUNDRA/23 SEQUOIA TUBULAR REAR LOWER LINK KIT
• IVD-54102T 22-23 TUNDRA/23 SEQUOIA TUBULAR REAR UPPER LINK KIT
• IVD-54202 22-23 TUNDRA/23 SEQUOIA BILLET REAR ADJ TRACK BAR KIT