to exacting specs. These bulbs are designed to improve the look and function of the Tail Light/Turn Signal light on your Gladiator. You will get higher visibility at night, with a modern look. These bulbs provide maximum light output in a low power draw package. Tested in-house by Diode Dynamic's engineers with constant-current inductive circuitry, along with transient suppression. In normal terminology, this means the lights are built to deal with the voltage cycles of your Jeep. Simple plug and play installation. Sold as a pair. Replaces 3157 bulb size.
Note: We recommend one resistor per turn signal bulb that is switched to LED. If you are installing both front and rear turn signal bulbs, we recommend four total resistors (see below).
Learn More
In-House Tested: Diode Dynamic's Engineering Team stress test these lights to make sure they will work flawlessly in your Jeep for years to come.
Brightness Selection: Available in multiple brightness levels. These replacement LED bulbs for your Tail Light/Turn Signal lights will give you higher visibility at night, with a modern look. The basic option is a good choice if you're looking for a simple change of color, for something more modern. Choose something further up the list if you'd like to increase output as well!
Fitment: Bulb Size: 3157.
Operating Voltage: 9-16V
Flasher Setup: BCM Controlled (resistor only).
Simple Installation: Plug and play! Quick and east install.
Bulb Options:
- 48 LEDs in omnidirectional design.
- Chrome reflector on top for clean appearance.
- Molded connector with sturdy terminals.
- Cosmetic upgrade only.
- 280 lumens per bulb.
3157 HP48 (280 lumens)
- Four COB type LED with a single high-power chip mounted at top.
- Full metal heatsinking for reliable operation.
- Nonpolar and CK compatible electrical design.
- 310 lumens per bulb.
3157 HP11 (310 lumens)
-
3157 XP80 (510 lumens)
- Sixteen high-power 5W LEDs arranged in all directions.
- Metal heatsink to maintain high output.
- Inductive constant-current drive circuit.
- 510 lumens per bulb.
Specs
For 3157 HP48 LED Bulbs:
For 3157 HP11 LED Bulbs:
For 3157 XP80 LED Bulbs:
Fitment
Jeep Gladiator (JT)
Options
Diode Dynamics Tail Light/Turn Signal LED (AMBER) Bulb Pair Options
| Part Number | Catalog # | Bulb Model | Price | ||||||
|---|---|---|---|---|---|---|---|---|---|
| DD0055P | 97063-0024 | 3157 HP48 LED Bulbs | $39.95 | ||||||
| DD0050P | 97063-0025 | 3157 HP11 LED Bulbs | $59.95 | ||||||
| DD0058P | 97063-0026 | 3157 XP80 LED Bulbs | $89.95 |
to exacting specs. These bulbs are designed to improve the look and function of the Tail Light/Turn Signal light on your Gladiator. You will get higher visibility at night, with a modern look. These bulbs provide maximum light output in a low power draw package. Tested in-house by Diode Dynamic's engineers with constant-current inductive circuitry, along with transient suppression. In normal terminology, this means the lights are built to deal with the voltage cycles of your Jeep. Simple plug and play installation. Sold as a pair. Replaces 3157 bulb size.
Note: We recommend one resistor per turn signal bulb that is switched to LED. If you are installing both front and rear turn signal bulbs, we recommend four total resistors (see below).
Learn More
In-House Tested: Diode Dynamic's Engineering Team stress test these lights to make sure they will work flawlessly in your Jeep for years to come.
Brightness Selection: Available in multiple brightness levels. These replacement LED bulbs for your Tail Light/Turn Signal lights will give you higher visibility at night, with a modern look. The basic option is a good choice if you're looking for a simple change of color, for something more modern. Choose something further up the list if you'd like to increase output as well!
Fitment: Bulb Size: 3157.
Operating Voltage: 9-16V
Flasher Setup: BCM Controlled (resistor only).
Simple Installation: Plug and play! Quick and east install.
Bulb Options:
- 48 LEDs in omnidirectional design.
- Chrome reflector on top for clean appearance.
- Molded connector with sturdy terminals.
- Cosmetic upgrade only.
- 280 lumens per bulb.
3157 HP48 (280 lumens)
- Four COB type LED with a single high-power chip mounted at top.
- Full metal heatsinking for reliable operation.
- Nonpolar and CK compatible electrical design.
- 310 lumens per bulb.
3157 HP11 (310 lumens)
-
3157 XP80 (510 lumens)
- Sixteen high-power 5W LEDs arranged in all directions.
- Metal heatsink to maintain high output.
- Inductive constant-current drive circuit.
- 510 lumens per bulb.
Specs
For 3157 HP48 LED Bulbs:
For 3157 HP11 LED Bulbs:
For 3157 XP80 LED Bulbs:
Fitment
Jeep Gladiator (JT)
Options
Diode Dynamics Tail Light/Turn Signal LED (AMBER) Bulb Pair Options
| Part Number | Catalog # | Bulb Model | Price | ||||||
|---|---|---|---|---|---|---|---|---|---|
| DD0055P | 97063-0024 | 3157 HP48 LED Bulbs | $39.95 | ||||||
| DD0050P | 97063-0025 | 3157 HP11 LED Bulbs | $59.95 | ||||||
| DD0058P | 97063-0026 | 3157 XP80 LED Bulbs | $89.95 |
